Audiopipe Surprise! WOW!

[SPLaudio 5,000+ posts]

those were korean made audiopipes from 6-7yrs ago.

 

[SicAudio 5,000+ posts]

the old AP is far superior to the new AP... always was...

 

[Papermaker85 5,000+ posts]

Do me a favor and check the parts caps resistors etc..

ANC let me see a thd an channel separation slew rate etc..

 

[infamous_e46 5,000+ posts]

yes people this was the one really good series of audiopipe the mono was a zenon board

audiopipe gd6001

 

[basscort2009 5,000+ posts]

^^ i had that gd-6001 and a gm504 (4 channel)

both were very underrated. never clamped the 4 channel but the mono did 3k rms at .25 on 14.4 volts. and would play that daily all day every day. it beat out the 20.1s and sundown 1500s all day long. very awesome built amps. ill see if i can dig up some pics.

and yes ram that amp had some **** guts for a 4 channel

 

[basscort2009 5,000+ posts]

my gm-354

my gm-504

and my gd-6001 (18 volt stable, .25 ohm stable, american built, great protection circuit.)

 

[akheathen Premium Member]

lol, man, that amp isn't but >5years old, but it's strait out of the 90's.... i bet one day you might find an olds school amp with near identical internals, right down to those fets

 

[Dirtrider4eva 10+ year member]

wow. those gd series look very well built. i find the brown board of the OPs post ironic to audiopoop, but all i see is good quality. i feel it will do a little more than rated...

the older AP definately strikes me as great amps.. i am a fan, just never ran em.

however, to the post a few above, you may be running the coils at .5 ohm, but with vehicle and box rise, your easily sitting at 1ohm or greater man. now thats not continous however. it is possible for it to drop under 1 ohm on certain tones