Attn Loud Trunks

hey what type od deadener you using and i seen your going to carlisle i should be there dont know if cra will be done but i hope.Alt should be here by end of week but my amp took a shit so i dont know how long its gonna take to get it back i might just by another one.I just need some batts but i will see you there
deadner, i got some dynamat extreme, ss damplifer, fatmat, and peel n seal. lil bit of everything. yeah ill be at carlisle. mainly going to just walk around and check out some set ups. but since i am goin i am gonna run the 39.9 class

 
A New Yorker and a Pontiac owner. We should get together and make it happen! There is no such thing as too big or too heavy a box to have to work with.//content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif
lol possibly //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

its not too heavy to work with, for a single person with not much time on their hands it is :p and taking my back seats out was a pain in the *** -_- still am missing two bolts in them atm cuz i was getting frustrated with tryna get them back in //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

im hoping to have it done eventually, looking at estimations on how much deadener i would need, and what exactly i would need.. so looking around //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 
lol possibly //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif
its not too heavy to work with, for a single person with not much time on their hands it is :p

im hoping to have it done eventually, looking at estimations on how much deadener i would need, and what exactly i would need.. so looking around //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif
where abouts in NY?

 
ill get it done eventually within a month or so

money is tight atm, and need to upgrade electrical a little bit, have 1200rms(little i know) running atm with stock 105 amp alt and thinking if just a starting battery upgrade would be enough.. kinetik hc1400 possibly, or if i can get a yellow top i can benefit from more maybe, either way i know im upgrading battery under hood, just wondering if when i do that if ill need to add another battery in the back (hope not lol).. gonna be adding another amp to power speakers, tweets, mids soon so thats another 400-600rms depending on what exactly i do, possibly more

havnt been able to do big three yet, was supposed to be getting some 0g wires from a friend but hasnt been around to do so yet

 
ill get it done eventually within a month or so
money is tight atm, and need to upgrade electrical a little bit, have 1200rms(little i know) running atm with stock 105 amp alt and thinking if just a starting battery upgrade would be enough.. kinetik hc1400 possibly, or if i can get a yellow top i can benefit from more maybe, either way i know im upgrading battery under hood, just wondering if when i do that if ill need to add another battery in the back (hope not lol).. gonna be adding another amp to power speakers, tweets, mids soon so thats another 400-600rms depending on what exactly i do, possibly more

havnt been able to do big three yet, was supposed to be getting some 0g wires from a friend but hasnt been around to do so yet
how much ya need? i got a 7ft piece 2ft piece and a couple 14" piece ill give ya dirt cheap if ya want it for the big 3

 
how much ya need? i got a 7ft piece 2ft piece and a couple 14" piece ill give ya dirt cheap if ya want it for the big 3
not 100% sure yet, gotta check and see distance from + terminal to + on alt

when i checked quick, i couldnt find the + on alt or engine block to chassis wires //content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif

im sure 10-12 total feet would be enough buddy was gonna give me 15ft i think

 
20-25mins north of syracuse
hour and a half away from buffalo.

Sheyot your in my playground!//content.invisioncic.com/y282845/emoticons/cool.gif.3bcaf8f141236c00f8044d07150e34f7.gif

Ya ever notice I do most of all my work alone? Don't ever let that stop ya:p:

 
let me know
will do, thank you

Ya ever notice I do most of all my work alone? Don't ever let that stop ya:p:

well, lets share somethin i doubt ya'll knew, i dont have much time, i still go to school, yes HIGH SCHOOL, im only 17 //content.invisioncic.com/y282845/emoticons/eek.gif.771b7a90cf45cabdc554ff1121c21c4a.gif and a junior //content.invisioncic.com/y282845/emoticons/eek.gif.771b7a90cf45cabdc554ff1121c21c4a.gif lol, and i work part time //content.invisioncic.com/y282845/emoticons/greedy.gif.5a53e6246569d7ab79867170f3b06629.gif so i do what i can in the time allotted //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif but i enjoy doing it.. got big into car audio when i was like.. 14 and looking to get into a big time sooner or later //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

so im a nooby, i know.. but i know sorta what im doing, not it all.. but more than some (not saying any of you guys here) but no more than most my age //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif hopefully soon enough, ill know about custom fabrication and what not so i can make custom speaker mounts in door panels and such along with box building and hopefully making a competition worthy system by next year.. one of my goals

 
will do, thank you




well, lets share somethin i doubt ya'll knew, i dont have much time, i still go to school, yes HIGH SCHOOL, im only 17 //content.invisioncic.com/y282845/emoticons/eek.gif.771b7a90cf45cabdc554ff1121c21c4a.gif and a junior //content.invisioncic.com/y282845/emoticons/eek.gif.771b7a90cf45cabdc554ff1121c21c4a.gif lol, and i work part time //content.invisioncic.com/y282845/emoticons/greedy.gif.5a53e6246569d7ab79867170f3b06629.gif so i do what i can in the time allotted //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif but i enjoy doing it.. got big into car audio when i was like.. 14 and looking to get into a big time sooner or later //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

so im a nooby, i know.. but i know sorta what im doing, not it all.. but more than some (not saying any of you guys here) but no more than most my age //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif hopefully soon enough, ill know about custom fabrication and what not so i can make custom speaker mounts in door panels and such along with box building and hopefully making a competition worthy system by next year.. one of my goals

I'm more than happy to help ya out anytime! Whenever you wanna get on a meter or just bust out some work just holla at me. Everyone know's I'm always down to pound.//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 
i wish i was able to do a blowthrough with my trunk, crownvic trunk setup ftl, and my car rattles horribly, you can hear it through walls, but ain't to much you can do with 2 btls 15s and a rd5750

 
I'm more than happy to help ya out anytime! Whenever you wanna get on a meter or just bust out some work just holla at me. Everyone know's I'm always down to pound.//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif
will do //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

and i see your not that far away, hour or so.. bit more

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

thorshammer1

10+ year member
CarAudio.com Veteran
Thread starter
thorshammer1
Joined
Location
Auburn, NY
Start date
Participants
Who Replied
Replies
1,570
Views
133,087
Last reply date
Last reply from
basshedz06
1778763859842.png

Doxquzme

    May 14, 2026
  • 0
  • 0
IMG_20260513_214311575.jpg

ThxOne

    May 13, 2026
  • 0
  • 0

New threads

Top