Attn Loud Trunks

hey what type od deadener you using and i seen your going to carlisle i should be there dont know if cra will be done but i hope.Alt should be here by end of week but my amp took a shit so i dont know how long its gonna take to get it back i might just by another one.I just need some batts but i will see you there
deadner, i got some dynamat extreme, ss damplifer, fatmat, and peel n seal. lil bit of everything. yeah ill be at carlisle. mainly going to just walk around and check out some set ups. but since i am goin i am gonna run the 39.9 class

 
A New Yorker and a Pontiac owner. We should get together and make it happen! There is no such thing as too big or too heavy a box to have to work with.//content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif
lol possibly //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

its not too heavy to work with, for a single person with not much time on their hands it is :p and taking my back seats out was a pain in the *** -_- still am missing two bolts in them atm cuz i was getting frustrated with tryna get them back in //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

im hoping to have it done eventually, looking at estimations on how much deadener i would need, and what exactly i would need.. so looking around //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 
lol possibly //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif
its not too heavy to work with, for a single person with not much time on their hands it is :p

im hoping to have it done eventually, looking at estimations on how much deadener i would need, and what exactly i would need.. so looking around //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif
where abouts in NY?

 
ill get it done eventually within a month or so

money is tight atm, and need to upgrade electrical a little bit, have 1200rms(little i know) running atm with stock 105 amp alt and thinking if just a starting battery upgrade would be enough.. kinetik hc1400 possibly, or if i can get a yellow top i can benefit from more maybe, either way i know im upgrading battery under hood, just wondering if when i do that if ill need to add another battery in the back (hope not lol).. gonna be adding another amp to power speakers, tweets, mids soon so thats another 400-600rms depending on what exactly i do, possibly more

havnt been able to do big three yet, was supposed to be getting some 0g wires from a friend but hasnt been around to do so yet

 
ill get it done eventually within a month or so
money is tight atm, and need to upgrade electrical a little bit, have 1200rms(little i know) running atm with stock 105 amp alt and thinking if just a starting battery upgrade would be enough.. kinetik hc1400 possibly, or if i can get a yellow top i can benefit from more maybe, either way i know im upgrading battery under hood, just wondering if when i do that if ill need to add another battery in the back (hope not lol).. gonna be adding another amp to power speakers, tweets, mids soon so thats another 400-600rms depending on what exactly i do, possibly more

havnt been able to do big three yet, was supposed to be getting some 0g wires from a friend but hasnt been around to do so yet
how much ya need? i got a 7ft piece 2ft piece and a couple 14" piece ill give ya dirt cheap if ya want it for the big 3

 
how much ya need? i got a 7ft piece 2ft piece and a couple 14" piece ill give ya dirt cheap if ya want it for the big 3
not 100% sure yet, gotta check and see distance from + terminal to + on alt

when i checked quick, i couldnt find the + on alt or engine block to chassis wires //content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif

im sure 10-12 total feet would be enough buddy was gonna give me 15ft i think

 
20-25mins north of syracuse
hour and a half away from buffalo.

Sheyot your in my playground!//content.invisioncic.com/y282845/emoticons/cool.gif.3bcaf8f141236c00f8044d07150e34f7.gif

Ya ever notice I do most of all my work alone? Don't ever let that stop ya:p:

 
let me know
will do, thank you

Ya ever notice I do most of all my work alone? Don't ever let that stop ya:p:

well, lets share somethin i doubt ya'll knew, i dont have much time, i still go to school, yes HIGH SCHOOL, im only 17 //content.invisioncic.com/y282845/emoticons/eek.gif.771b7a90cf45cabdc554ff1121c21c4a.gif and a junior //content.invisioncic.com/y282845/emoticons/eek.gif.771b7a90cf45cabdc554ff1121c21c4a.gif lol, and i work part time //content.invisioncic.com/y282845/emoticons/greedy.gif.5a53e6246569d7ab79867170f3b06629.gif so i do what i can in the time allotted //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif but i enjoy doing it.. got big into car audio when i was like.. 14 and looking to get into a big time sooner or later //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

so im a nooby, i know.. but i know sorta what im doing, not it all.. but more than some (not saying any of you guys here) but no more than most my age //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif hopefully soon enough, ill know about custom fabrication and what not so i can make custom speaker mounts in door panels and such along with box building and hopefully making a competition worthy system by next year.. one of my goals

 
will do, thank you




well, lets share somethin i doubt ya'll knew, i dont have much time, i still go to school, yes HIGH SCHOOL, im only 17 //content.invisioncic.com/y282845/emoticons/eek.gif.771b7a90cf45cabdc554ff1121c21c4a.gif and a junior //content.invisioncic.com/y282845/emoticons/eek.gif.771b7a90cf45cabdc554ff1121c21c4a.gif lol, and i work part time //content.invisioncic.com/y282845/emoticons/greedy.gif.5a53e6246569d7ab79867170f3b06629.gif so i do what i can in the time allotted //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif but i enjoy doing it.. got big into car audio when i was like.. 14 and looking to get into a big time sooner or later //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

so im a nooby, i know.. but i know sorta what im doing, not it all.. but more than some (not saying any of you guys here) but no more than most my age //content.invisioncic.com/y282845/emoticons/tongue.gif.6130eb82179565f6db8d26d6001dcd24.gif hopefully soon enough, ill know about custom fabrication and what not so i can make custom speaker mounts in door panels and such along with box building and hopefully making a competition worthy system by next year.. one of my goals

I'm more than happy to help ya out anytime! Whenever you wanna get on a meter or just bust out some work just holla at me. Everyone know's I'm always down to pound.//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 
i wish i was able to do a blowthrough with my trunk, crownvic trunk setup ftl, and my car rattles horribly, you can hear it through walls, but ain't to much you can do with 2 btls 15s and a rd5750

 
I'm more than happy to help ya out anytime! Whenever you wanna get on a meter or just bust out some work just holla at me. Everyone know's I'm always down to pound.//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif
will do //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

and i see your not that far away, hour or so.. bit more

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

thorshammer1

10+ year member
CarAudio.com Veteran
Thread starter
thorshammer1
Joined
Location
Auburn, NY
Start date
Participants
Who Replied
Replies
1,570
Views
133,007
Last reply date
Last reply from
basshedz06
IMG_20260513_214311575.jpg

ThxOne

    May 13, 2026
  • 0
  • 0
IMG_20260513_213956814.jpg

ThxOne

    May 13, 2026
  • 0
  • 0

New threads

Top