ap30001d wiring?

[blabo219 10+ year member]

You can run it bridged @ 2ohm or run each channel @ 1ohm. Bridged you can safely run the amp down to 1.3ohms, each channel can be ran safely @.5 daily.

you think thatd be good then doing it bridged even though its 2 ohm minimum?

it would be at 1.5 but theres gunna be some imp rise so it would be close

 

[J31Rob 5,000+ posts]

Nothing wrong with those amps at all. You must be one of those guys who pays for customer service//content.invisioncic.com/y282845/emoticons/rolleyes.gif.c1fef805e9d1464d377451cd5bc18bfb.gif

//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

 

[blabo219 10+ year member]

then why the fuck did you post them? //content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif

they dont have them posted but thats a close guess, thought somebosy had one that could compare

 

[jusBloud 10+ year member]

unless they have changed those subs they won't take 3000 any way. imo

 

[blabo219 10+ year member]

unless they have changed those subs they won't take 3000 any way. imo

I put one on about 1.5k alone before.. it worked good idk about using both tho

 

[SicAudio 5,000+ posts]

you think thatd be good then doing it bridged even though its 2 ohm minimum?
it would be at 1.5 but theres gunna be some imp rise so it would be close

it will be fine dude i was making a joke lolz. with decent electrical they will do 1.5 easy.

i know someone right now running 1 at 1.33 dialed in at 51.65 volts for 2kw exactly after rise to 6 hfi 12's in a wall doing more flexing db than he did with 2 18's on 5kw so it will handle it with good juice.

 

[1ndatrunk 10+ year member]

Won't take that either. Run it at 1.5ohms bridged and be done, just turn your gains waaaay down. I've had 3 12s and 1 10, all on a MTX1501d. None of them liked that amp for extended periods

 

[blabo219 10+ year member]

it will be fine dude i was making a joke lolz. with decent electrical they will do 1.5 easy.i know someone right now running 1 at 1.33 dialed in at 51.65 volts for 2kw exactly after rise to 6 hfi 12's in a wall doing more flexing db than he did with 2 18's on 5kw so it will handle it with good juice.

oh nice. so you think both of them would handle it ok?

 

[blabo219 10+ year member]

Won't take that either. Run it at 1.5ohms bridged and be done, just turn your gains waaaay down. I've had 3 12s and 1 10, all on a MTX1501d. None of them liked that amp for extended periods

Why?

 

[jusBloud 10+ year member]

I put one on about 1.5k alone before.. it worked good idk about using both tho

i couldn't put that much on one but it was in a high output box. maybe 750. 1000 at the most.i doubt it will take 1000. ive had them sealed too

 

[1ndatrunk 10+ year member]

Why?

Not at the same time. Each was at different times, but all within the same year or 2.

 

[SicAudio 5,000+ posts]

oh nice. so you think both of them would handle it ok?

all day long dude you will be fine

just make sure u have **** good electrical ap amps dont like sloppy voltages

 

[Annnarbor84 5,000+ posts]

you think thatd be good then doing it bridged even though its 2 ohm minimum?
it would be at 1.5 but theres gunna be some imp rise so it would be close

It will be fine @ 1.5 daily. Just make sure you have an extra batt or two.