Jusaplaya
Junior Member
I had a dhd dual amp kit powering my last setup. The dual amp kit will power my 4 channel, but for some reason it will not power my new rockford fosgate 1000 watt amp. The dual amp kit had 1 blown 30 amp fuse. I replaced that fuse with a 40 amp I got at the auto parts store. I got 12 volts going to the fosgate 1000. When I turn the system on the voltage drops from 12 volts to 4 volts. My 4 channel turns on and plays fine. It is has proper voltage going to it. The other side wire voltage drops out very quickly. I am guessing I need a good 4 gauge amp kit just for my new 1000 watt amp. 60 amp fuses at 14 volts is not a 1000 watts. Any recommend a decent amp kit for this amp. Thanks for your time. **** I was hoping to listen to this amp..