amp to amp wiring

[nas786 10+ year member]

I would suggest going w/ a distro block too, cuz the way its wired if one amp fuses i think the other one is done too.

 

[frumpy 10+ year member]

I would suggest going w/ a distro block too, cuz the way its wired if one amp fuses i think the other one is done too.

i just said i already did that

 

[redswingline 10+ year member]

does the amp turn on at all? if so check the subs make sure your wire did not come loose. Also check remote wire if the amp isnt turning on, o yeah and it coulb be bad ground, bad amp...you have plenty more to check before ruling out the radio

 

[frumpy 10+ year member]

does the amp turn on at all? if so check the subs make sure your wire did not come loose. Also check remote wire if the amp isnt turning on, o yeah and it coulb be bad ground, bad amp...you have plenty more to check before ruling out the radio

amp turns on checked with a dmm everythings getting power (and subs will work if i switch the rcas out of the component amp into the sub amp) and everything was just rewired grounds are good i know for sure, i had it professionally rewired last night and the distro block put in remote wire is getting power and plugged in, amp is new and like i said works when you put the other rcas in

 

[frumpy 10+ year member]

Finally got it working, did some more wiring stuff and the ground came out when i moved the box back

thanks for all the help