amp settings?>

[THXdts 10+ year member]

What is up guys. I just installed my hifonics 2006d and btl. it is decenly loud, but when i mess with the settings, it gets louder. i set my gain at 44.7v, at volume 20, if i turn it up to like 30..its loud as shit. what do I want to set all my amp settings to? also everytime i turn on my car, my sub makes a pop sound.

Click to read more...

 

[dleccord 5,000+ posts]

what part of the settings on it don't you understand?

 

[THXdts 10+ year member]

Everything except the gain.

 

[jacka 10+ year member]

what tones did you use? 0db?

 

[Kriszilla 10+ year member]

*eyes the big sticky at the top of the amplifier sub-forum about setting gains... starts to say something... shakes head and backs out of the thread*//content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

Seriously though, go to the amp forum on here and read the sticky about setting your gains. Grab a multimeter, and a CD burned with a 1KHz 0db test tone (for mids/highs), 50Hz 0db test tone (subs) and go to work. You can get the tones from RealmOfExcursion.com

 

[dleccord 5,000+ posts]

Everything except the gain.

be more specific.

*eyes the big sticky at the top of the amplifier sub-forum about setting gains... starts to say something... shakes head and backs out of the thread*//content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif
Seriously though, go to the amp forum on here and read the sticky about setting your gains. Grab a multimeter, and a CD burned with a 1KHz 0db test tone (for mids/highs), 50Hz 0db test tone (subs) and go to work. You can get the tones from RealmOfExcursion.com

he already told us he knew how the gain works.

 

[THXdts 10+ year member]

Yes, I know how to set the gain, I just don't know what the other settings mean or what to set them at. The sub is not getting very loud.

 

[THXdts 10+ year member]

I figured out the problem, the gain was set way low. When I max my gain out, it only goes up to 22.xx volts. It needs to go to 44.7. How can I get it to go higher?

 

[el rafa 10+ year member]

Kinda of a newb here, but how high is your volume at your HU? Your HU volume will also affect the output.

Correct me if I'm wrong.

 

[THXdts 10+ year member]

It is at volume 20.

 

[shovelhd 10+ year member]

20 out of?

 

[THXdts 10+ year member]

20 out of 35.

 

[shovelhd 10+ year member]

Too low. Try 25 and see if that helps.