Amp rack part two

[steveyhustle]

very nice man nice and clean

 

[tcguy85 10+ year member]

on the car

aaahhh yes. those are marks that my previous box left behind. wasn't to thrilled about it but it's not really a big deal.

 

[tcguy85 10+ year member]

i like it, looks good, i would run the rca's different and carpet it but i like it better then the old one

how would you ru nthe rca's?

and yes it will be carpeted once my carpet gets here.

 

[Worlddre 5,000+ posts]

aaahhh yes. those are marks that my previous box left behind. wasn't to thrilled about it but it's not really a big deal.

//content.invisioncic.com/y282845/emoticons/word.gif.64b12e39f936af3b4fff38a1c0bd0244.gif life

 

[krouchchocolate 10+ year member]

how about build another panel over the amps, and have a rectangular cutout to show the amps off, so then it will hide all the wires and stuff. Carpet the panel that covers the amps and it will look like ***!

 

[tcguy85 10+ year member]

//content.invisioncic.com/y282845/emoticons/word.gif.64b12e39f936af3b4fff38a1c0bd0244.gif life

yea. lol

 

[tcguy85 10+ year member]

how about build another panel over the amps, and have a rectangular cutout to show the amps off, so then it will hide all the wires and stuff. Carpet the panel that covers the amps and it will look like ***!

hmmmmm.... thats a good posibility for the future. i could do it like i am planning then add that later if i want to.

 

[req 5,000+ posts]

yeap.

center two DD logos at angles isometrically, then make a second panel that is the height of the amps so that the amps sit in a little box, cut holes that are the same that cover up both the wiring and the mounting board, but leave holes just for the logos, make em about as big as the smallest amp but a little bit smaller.

carpet that, and leave a small area on top open, maybe pop a fan in there or something.

thats what id do because i do not like that suboofer box. //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

 

[patrick1202 10+ year member]

how about build another panel over the amps, and have a rectangular cutout to show the amps off, so then it will hide all the wires and stuff. Carpet the panel that covers the amps and it will look like ***!

hmmmmm.... thats a good posibility for the future. i could do it like i am planning then add that later if i want to.

i like that idea then make put in the middle or put it under the carpet where it looks rised

 

[tcguy85 10+ year member]

yeap.
center two DD logos at angles isometrically, then make a second panel that is the height of the amps so that the amps sit in a little box, cut holes that are the same that cover up both the wiring and the mounting board, but leave holes just for the logos, make em about as big as the smallest amp but a little bit smaller.

carpet that, and leave a small area on top open, maybe pop a fan in there or something.

thats what id do because i do not like that suboofer box. //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

yea a lot of people don't like the sub box. it serves its purpose so i'm keeping it.

 

[yunvme666 10+ year member]

much better i didnt wanna be the one to tell ya diff tho....lol.... i like it now , more safe......

 

[IDSkoT 5,000+ posts]

carpet that ***** and call it a day

x2.

The only problem about drilling your amps in before you carpet is once you carpet you can't find the f*cking holes! //content.invisioncic.com/y282845/emoticons/eek.gif.771b7a90cf45cabdc554ff1121c21c4a.gif

 

[tcguy85 10+ year member]

x2.
The only problem about drilling your amps in before you carpet is once you carpet you can't find the f*cking holes! //content.invisioncic.com/y282845/emoticons/eek.gif.771b7a90cf45cabdc554ff1121c21c4a.gif

yea i'll find em. lol. but i know what ya mean. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[krouchchocolate 10+ year member]

Or you can build a new box and make the width the exact size between the wheel wells, then make a false floor for your amp rack and have the amps sit on the floor with a panel covering the amps again with a rectangular cutout shape showing the DD logos.

HOT ***!!!

Not sure if you get it. lol

 

[tcguy85 10+ year member]

Or you can build a new box and make the width the exact size between the wheel wells, then make a false floor for your amp rack and have the amps sit on the floor with a panel covering the amps again with a rectangular cutout shape showing the DD logos.
HOT ***!!!

Not sure if you get it. lol

yea, i like that idea except i'd like to keep my spare and keep it somewhat simple to get to.