Skydronaut
Junior Member
I have a 1000w amp driving two kenwood 12 subs.
The drivers are running on channel 5, with the head unit running into 5 and 6. This setup worked fine for two weeks, but randomly died. Every time I try to turn it on, the pwr light fades off after about a second, and the prt light stays on.
Thought it was a loose connection issue; I got a crimping tool and re-crimped the +/- wire blades, and re-sanded the chassis ground surface, installing a proper ground bolt thru the chassis while I was down there. Didn't fix it.
What do I do next?
Sent from my iPhone using Tapatalk
![91629daf7d90f28c6e4cdef7b5ea702e.jpg](/proxy.php?image=http%3A%2F%2Fuploads.tapatalk-cdn.com%2F20160713%2F91629daf7d90f28c6e4cdef7b5ea702e.jpg&hash=72e6f395df38aa8df075de40007e4734)
![a8bdf36c51c38d706d9876e00962fed0.jpg](/proxy.php?image=http%3A%2F%2Fuploads.tapatalk-cdn.com%2F20160713%2Fa8bdf36c51c38d706d9876e00962fed0.jpg&hash=4bb53cfa7a393b2343d79009e1cea9e6)
The drivers are running on channel 5, with the head unit running into 5 and 6. This setup worked fine for two weeks, but randomly died. Every time I try to turn it on, the pwr light fades off after about a second, and the prt light stays on.
Thought it was a loose connection issue; I got a crimping tool and re-crimped the +/- wire blades, and re-sanded the chassis ground surface, installing a proper ground bolt thru the chassis while I was down there. Didn't fix it.
What do I do next?
Sent from my iPhone using Tapatalk