amp is cutting out

bsheltry55
10+ year member

Member
my amp stoped working, the power light and fan is on but does put out anything. if i hit the amp on top by where the pos. neg and rem wires are it works for like 1 sec the cuts out. i have hear little noises from the sub but i have to be right next to it. the noises arnt from the deck bc i had the deck off. but this had happened to me b4 and i took the amp apart then put it back together and worked fine for a week then did it today.

 
what amp is it? I have an old school orion XTR475 that has plugs and I pulled the plugs off one day and the positive terminal solder mount broke and came out... simply soldered it and its back to its original beastly state.

 
its a boss ol4kd when the amp stops working the lights stay on and the fan works it just doesnt put out anything.
Thats your issue right there......the amp is cheap!//content.invisioncic.com/y282845/emoticons/redface.gif.62fdbfe1a101588a808c4cff71bcb942.gif You young boys will never learn, "you get what you pay for!"

 
hell yea it was cheap $150 brand new but i dont care it gets me threw till i can buy something better. it was because i had it mounted on my box and a peice broke. i baught a box off someone and he said it was 3/4 mfd wood but its only 1/4 lol

 
sounds like when you tap on it something briefly touches something else and you get output, i bet a solder on the board or something of that nature busted.

a 1/4" mdf box would get blown to pieces in my setup, that is just stupid. when you are ready to spend $150 on a quality amp come to the forum and we will help you. Until the keep hitting your amp and expecting something out of nothing.

 
i fixed my amp today. yea that box i have boke many times.when u look at it all sides go crazy and vibrates alot and sopunds like crap from the back but im picking up my new box friday.

lol well mayb i have better luck with that amp bc i had the hooked up for two yrs so far.

 
haha i know that lol. i dont even think im getting 2000 at one ohm. is their a forum on here that can tell me how to figure that out. i found a chart a few months ago that converted volts into watts but i cant find it.

i am going to be buying a better amp when i get my new job.

i baught a spl z1x3000 or suttin like that and the boss amp blows it away. so im trying to get rid of that amp

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

bsheltry55

10+ year member
Member
Thread starter
bsheltry55
Joined
Location
Pittsfield, MA
Start date
Participants
Who Replied
Replies
10
Views
763
Last reply date
Last reply from
bsheltry55
IMG_5911.jpg

NorthFramingham

    Jun 30, 2026
  • 0
  • 0
2006.jpg

Popwarhomie

    Jun 29, 2026
  • 0
  • 0

New threads

Top