amp gain and sub compatible?

[NASTY08IMPALA 5,000+ posts]

ok why 80hz? ok and its at +6 whats the other -6 / -12 one?
ok cool 185w rms and 400watt max is just enough lol

Its just where u want to the subwoofer crossover set ..im not sure what the other -6-12 is for .or what setting its under ..play with it and see what sounds best

 

[pioneer_stan]

ok, sounds no different to me please research it for me?

 

---------- Post added at 01:39 AM ---------- Previous post was at 01:38 AM ----------

 

also research what 'normal gain V' is please as i want it @ 2V stock original normal max head unit

 

[NASTY08IMPALA 5,000+ posts]

ok, sounds no different to me please research it for me? 

---------- Post added at 01:39 AM ---------- Previous post was at 01:38 AM ----------

 

also research what 'normal gain V' is please as i want it @ 2V stock original normal max head unit

That wont be found anywhere ..if u want it closer ur gona have to use a oscope or dmm..and what setting is this -6-12 under? If it doesnt make a diff it might not pertain to the woofer

 

[pioneer_stan]

-6 or -12 is slope level...

 

[garychurch84 10+ year member]

Its just where u want to the subwoofer crossover set ..im not sure what the other -6-12 is for .or what setting its under ..play with it and see what sounds best

Has me alil lost aswell.there should LOW,MID,HIGH,which goes -6 to +6 on all three.then sw controls from-24 to +6.sla 0 to 4

 

[pioneer_stan]

Sla as in source level adjustment?

 

[pioneer_stan]

Also on the pioneer site it says gain of up to 6.4v why is it 6.4 lowest though and 0.2 highest?

 

[garychurch84 10+ year member]

Also on the pioneer site it says gain of up to 6.4v why is it 6.4 lowest though and 0.2 highest?

The gain has to be turned up more to match the weaker signal from the hu

 

[pioneer_stan]

Example plz with using numbers v

 

[NASTY08IMPALA 5,000+ posts]

Example plz with using numbers v

6.5v is the lowest setting .sensitivity increases as u go towards .2v u want to be at 2v

 

[pioneer_stan]

Why do they make it sound like 6.4v Is the highest? Also what slope should I have It on? -6 or -12?

 

[garychurch84 10+ year member]

OP that setup isn't gonna do much as it is.What kind of box is the sub in?

 

[pioneer_stan]

What is OP mean?

Sealed box

 

[nismos14 5,000+ posts]

You need to read more rather then ask questions. You should also read the manual of the radio. You are asking about totally different things. Crossovers and slopes vs gain settings. Just read, all of your answers are in the amp manual and the radio manual.

 

[pioneer_stan]

I read online about slopes. The manuals are very hard to understand