OP
blitz_fist
10+ year member
Member
- Thread Starter
- #31
Yeah tomorrow i'm going to rego over it all. Relocate the ground and everything. One thing might be a problem, I could not find and 4ga spade terminals anywhere around here, so I used a 10ga for the power wire, which is 5ga wire, so it didn't really all crimp into it, but i taped it all up after it.
I have a 100a in-line fuse,
and it read 12v with the key in and out of it.
I have a 100a in-line fuse,
and it read 12v with the key in and out of it.
