amp fan not running

  • Thread starter Unregistered
  • Start date
  • Replies 1
  • Views 887
  • 0
    Participant count
    Participant list
U

Unregistered

Guest
hi,

i have a pioneer gm-x944 amp and the fan is not running when the amp is on.

does it only kick in once the thermostats activate it, or should it run automaticaly?

thanks for any help.

 
most amps detect heat and when it is hot enough, the fan comes on, i really don't know why, just something else to go wrong, it should just be on when the amp is, anyways run the amp for a while, monitoring it's temperature egvery five minutes or so, if it gets really hot and the fan doesn't come on, something is wrong, my ppi's fan don't come on till it gets fairly hot, . hope that helps

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

It would also be easy to add an equalizer to have individual rca inputs for all of the channels. A decent one can be had for less than $40...
6
254
  • Locked
NVX MVPA1 Best tiny amp Installed a bunch, but have one pushing a sealed 12 @ 2ohm in my daily beater Can bump it all day long and barely gets...
4
533
Amp
This tested well on youtube - not familiar with the brand but it is a pretty standard china build house amplifier...
5
425
I agree with every one above. OFC is much better. Copper is a much better conductor than aluminum.
6
485

About this thread

Guest
Thread starter
Joined
Location
Start date
Participants
Who Replied
Replies
1
Views
887
Last reply date
Last reply from
really.jpg

Popwarhomie

    May 25, 2024
  • 0
  • 0
Screenshot_20240524_202505_Samsung Internet.jpg

winkychevelle

    May 24, 2024
  • 0
  • 0

New threads

Top