Alarm Help Please

[Race 10+ year member]

Hi... when I connected my alarm installation module in my car today when installing it, it started oddly clicking. It did this when only connected to the constant 12 volts and ground. It sounds like the relay inside of it. It clicks for a random amount of time before stopping, and stays silent until I move it. If I just slightly move it, it starts clicking again.

Will I need a new installation module? Ahh //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

Click to read more...

 

[Hook Me Up 10+ year member]

check the relay, and if at all possible have a dealer look at it to get a second opinion. NEver had this happen to me, but i would check the module inside to see whats up with it. Unscrew it and get an inside look at it

 

[azbass 5,000+ posts]

well its connected wrong, the relay inside is getting power and is energizing, go over everyhting.

 

[Race 10+ year member]

But how could it be connected wrong if it's only connected to the power and ground on the proper wires?