Adding a second alt to my setup

[I Like Waffle]

I have 2 extra alternators im planning to add one to my setup, just havent bolted it up yet. One is an 80 amp, externally regulated 3 wire like the stocker, other is a stock replacement, 80 amp internally regulated one wire setup. My question is, do i hook up the externally regulated ones regulator output to the same wires the other alts regulator is going to by adding in another plug or what? Or will i run into problems if i take the one wire alt and just wire it up in parallel with the existing one? //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

Click to read more...

 

[I Like Waffle]

*******, what ever happened to all the people here that knew their ****? //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

 

[KyleBechtold 5,000+ posts]

this may be one for rob or someone in the business..

 

[slam 5,000+ posts]

I would help but u thought i didnt know how to install deadener. so ill just keep my mouth shut

//content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

 

[I Like Waffle]

What do you mean? Im a smartass most the time and say dumb ****, but what exactly did i say?

 

[slam 5,000+ posts]

dont worry. gl with the set up

 

[Stephen_c 10+ year member]

you can do that but the battery light will probably come on if it has one.

 

[I Like Waffle]

I think i remember reading that with the voltage regulator off sometimes they will put out higher voltage? Or maybe that was only with newer cars because of some way the alt works.