Active crossover?

Absolutely will..SStream make pretty decent stuff also.
So i ordered that db drive e7eq nd my 4 channel amp is still only playin low notes i disconnected my sub amp nd put my 4 channel on those wires with my 4 pa dbs70 6x8s still no high or mid jus lows someone help ive adjusted everything could this be the amp

 
So i ordered that db drive e7eq nd my 4 channel amp is still only playin low notes i disconnected my sub amp nd put my 4 channel on those wires with my 4 pa dbs70 6x8s still no high or mid jus lows someone help ive adjusted everything could this be the amp
No, you've probably got a low pass filter turned on on your head unit

 
I have rewired it my sub is playin good but i have same problem i cant find out what i need to change im only getting low notes on my 4 channel
Double check all the settings on your head unit, like I said you probably have a low pass filter turned off which cuts out all the high frequencies from going to the sub, but you don't want that on in your case.

 
Double check all the settings on your head unit, like I said you probably have a low pass filter turned off which cuts out all the high frequencies from going to the sub, but you don't want that on in your case.
So wat if i have a hu with 2 sets rca in the back,front nd rear, could i use a rca y for my 4 channel amp running from front nd my sub from rear

 
Run your four channel from one set of rca's with a y splitter at the xover just be sure u put one set on left speakers and one set on right speakers and run another set of RCA's from deck to sub input on xover

 
So wat if i have a hu with 2 sets rca in the back,front nd rear, could i use a rca y for my 4 channel amp running from front nd my sub from rear
Depends on your amp, lots of amps can run 4 channels off of only 2 channels of RCAs.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Your deck has it built in ...you just need to dial it in ...i have 2 or 3 of those decks ...nice for the money
1
1K
Pretty much. It's just a nice kit. A solo rite Scarlett 2i2, XLR mic and a loop back cable are my next purchases so I can get accurate phase...
10
541
It's always leaned that direction. Not sure how cheap you can really get anything done these days. Deadening and custom mounting...
10
947
https://www.alpine-usa.com/products/subwoofers/truck-enclosures
3
1K
As for your setup, the circled input in that reply is where the LOC (built into the amp) is located. You don’t need a LOC other than that. All you...
35
4K

About this thread

john_doe_318

10+ year member
Member
Thread starter
john_doe_318
Joined
Location
bossier city
Start date
Participants
Who Replied
Replies
28
Views
1,741
Last reply date
Last reply from
SounDrive
1000007975.jpg

Mr FaceCaser

    May 16, 2024
  • 0
  • 0
1000007974.jpg

Mr FaceCaser

    May 16, 2024
  • 0
  • 0

New threads

Top