Accord wall dilemma???

[Tkitt21 10+ year member]

Alright well i got quoted yesterday by audio inovations a shop in my town $750 for them to wall my 4door accord with fiberglassed rounded port(Like steves) and corners inside and covered in rhino lining.

Iv got 2 18" Fi btls d1coils and was thinking if i was going to spend that much on a wall I might as well go all out and try to fit 4 of them in there and if not 4 then 3.

If i do this then i want to start competing

So my question to yall is would i be able to fit 4?

My Absolute max dimensions are

43"-depth

39"Height

56"-width

Click to read more...

 

[dman4486 5,000+ posts]

I say not enough space for enough enclosure for 4.....3 is a maybe and 2 would be great

 

[iamamp3pimp 5,000+ posts]

I say not enough space for enough enclosure for 4.....3 is a maybe and 2 would be great

you're crazy

hes got 44 cubes + after double baffle

thats enough for 8....ported...

 

[iamamp3pimp 5,000+ posts]

but thats the biggest accord ive ever heard of...

 

[dman4486 5,000+ posts]

but thats the biggest accord ive ever heard of...

I was going on what an accord actually is.....there is not enough usable space for 4 in an accord

edit: at least I don't believe there is

 

[Tkitt21 10+ year member]

but thats the biggest accord ive ever heard of...

thats with my seats skutted up with ma knees in the dash and the rear door panels removed

 

[dman4486 5,000+ posts]

thats with my seats skutted up with ma knees in the dash and the rear door panels removed

explains a lot...thanks

 

[iamamp3pimp 5,000+ posts]

be comfortable

go with 2......\

and next time you measure, measure from the sides, not the middle.

the height i mean........

 

[Tkitt21 10+ year member]

be comfortable
go with 2......\

and next time you measure, measure from the sides, not the middle.

the height i mean........

?measure how?

 

[dman4486 5,000+ posts]

?measure how?

measure the gap you have to get the box in the vehicle.....like the door jam

 

[Tkitt21 10+ year member]

measure the gap you have to get the box in the vehicle.....like the door jam

the shop will be building it inside the car.permanent

 

[dman4486 5,000+ posts]

the shop will be building it inside the car.permanent

in that case, since wood is flat, then measure from floor to ceiling just inside the jams....

this way you get the lowest point in the roof

 

[Tkitt21 10+ year member]

Alright well i stopped by the shop again today and talked to the owner sum more. And we went out and took sum measurements he took them a lil short jus to b save and he said he thinks he calulated it right and each sub would have like 3.7 or 4 cubs per and i told him that ported they require 5-8per and he said they might be able to do sealed but they still might b a lil under wat they r rated and not having enough airspace with make them more punchier...He said his box specialist had the day off and told me to stop by tomorrow and we'll have him measure just incase he might know a way itll work to get 4.

He told me 2 would be plenty loud and id prolly b hitting in the 155-160db.and said that if it still wasnt loud enough thatthey could make me another faceplate to where i could do 12's or 15's.

Im gonna c if itll work if i have my seats skutted up and door panels removed and maybe even rear deck removed

 

[GMCJimmyslt2000 10+ year member]

u should have more that 10 cubes in that accored if ur gonna wall it off, only 5 cubes each is to small for 18inch btls

 

[Tkitt21 10+ year member]

ya ported 18" blts require 5-8cubs per