A pros help needed

  • 2
    Participant count
  • Participant list
Well im going to change my current set up , 2 15 RE audio *** powered by a brz1200 in a 2000 audi a8 6cube box tuned to 38hz , port and subs up port aimed at cut out in rear deck. Sounds good but i think it should be louder and lower (cant do subs back, trunks not tall enough) i want to cut out the rear deck more and build the box in the trunk 8cube with subs and ports in rear deck sealed off from the trunk but im wondering what would be better. 3 6in pvc ports 85 sq inches of area tuned to 30hz or 2 8in pvc ports giving me 100sq in tuned to 30hz?

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

I agree with the brightness thing. I have mine set to black out in 5 seconds, lol. Never noticed the crossover issue since my dsp handles...
4
2K
Got it figured out! Thankfully a friend just found out about KunKonceptz UBT-20 terminal adapters that allow multiple connections to my type 94...
3
174
Turn the volume completely down and operate ot normally. This is to see if it is the built in amplifier that is shutting down. If the radio does...
1
272
That would be a function of the harness, not the HU, I think. Have you looked into a Maestro or iData interface? i would check with crutchfield...
12
458
Dammned good speakers. Just pass up the CL series,and you will be pleased with CDT speakers. I still enjoy all mine. Polk MM series and Infinity...
4
438

About this thread

ringspun09

Junior Member
Thread starter
ringspun09
Joined
Location
Blaine Minnesota
Start date
Participants
Who Replied
Replies
2
Views
648
Last reply date
Last reply from
ringspun09
Buick Amp Connector.JPG

maylar

    Jun 2, 2024
  • 0
  • 0
1717274743729.png

Doxquzme

    Jun 1, 2024
  • 0
  • 0

New threads

Top