Chaotic_Thought
10+ year member
Senior VIP Member
Okay so i have finally tracked down the source of one of my issues. The voltage output on the RCA's is not the same between all channels.
Fade and balance set to zero, all processing turned off. flat eq and filters set to pass. Front left channel will show a higher voltage when playing a test tone.
With DMM on the pigtails coming out of the head unit. No patch cables connected. I also have to ground the pre outs to get any voltage reading on the head unit.
Is this a fixable issue or is the head unit pretty much toast?
Fade and balance set to zero, all processing turned off. flat eq and filters set to pass. Front left channel will show a higher voltage when playing a test tone.
With DMM on the pigtails coming out of the head unit. No patch cables connected. I also have to ground the pre outs to get any voltage reading on the head unit.
Is this a fixable issue or is the head unit pretty much toast?