4 type r 12" box design wanted

[dumpin907 10+ year member]

if anyone knows a good box design site or wants to help me design a box that would be great.

nothing too crazy, just ported at 31hz and ill give you my exact dims and all later.

going in a jeep cherokee, amp- zx25001

rough dims.. 43L 22D 25H

subs up, port back, wanting to do a horizontal slot port on the bottom facing the back

thanks,

Click to read more...

 

[perfecxionX 10+ year member]

thats going to be a tight fit getting four 12s on the top of that box, you should get more precise dimensions to be sure.

 

[dumpin907 10+ year member]

thats going to be a tight fit getting four 12s on the top of that box, you should get more precise dimensions to be sure.

yeah thats my only problem. how close can i get to my back hatch? about 3-4 in?

 

[cshaw 10+ year member]

yeah thats my only problem. how close can i get to my back hatch? about 3-4 in?

stager the subs to save room. keep the box at least a ports width away from the hatch, airflow is key.

 

[dumpin907 10+ year member]

stager the subs to save room. keep the box at least a ports width away from the hatch, airflow is key.

ha yeah i just started to draw it out staggerd and it should work out, would 43 wide be enough for 4 12's you think

 

[Skip01 5,000+ posts]

Not with 22in depth

Of course you could always put the subs facing diff directions

2 up and 1 on each side...........what vehicle?

 

[PSturmer 10+ year member]

i did a system once in a cherokee. 4 12'' type r's off 5k rms. it was ridiculous on the lows and still had a lot of output. if you are interested just shoot me a pm.