jesus- find anything more expensive?
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7958030992&category=38636
that would do exactally what you want. now if they only sold 6 channel.
Either way the answer is no. 1 channel is like just the front left. Front left and right is 2 channels. Not really sure why you would hook a 4 channel amp just up to a single channel.Actually I was looking for a RCA that starts 1 channel and ends up 4 channel so I can hook up my 4 channel amp easier!
I know this.i had a huuuuuge post written to awnser your question - and then some.
but my work computer crashed. so instead, get one of these that will reach from your head unit to your amplifier (with some slack)
that will be able to use SIDE TO SIDE fader, not front to back. but you will have to deal with it. it will still be stereo.
then get TWO of these (only like 5~10" long needed)-
hook the long cable to your HU and run it to your trunk. then plug the Y adapter into one channel so it splits to stereo, and do the same with the toher, and plug them into the corrisponding (channel 1) (channel 2) phono jacks on the amplifier.
here is a diagram.
this should seriously be common sense. but i hope that helps.
okay lets just say I have only one preout from my hu could I connect this rca to my four channel?http://www.crutchfield.com/S-lnR3bIVkWEf/cgi-bin/ProdView.asp?g=719&id=detailed_info&i=211ZN3604
It would be cheaper and easier to get one of these (if they can connect a 4 channel with one preout) than getting a regular rca and 2 Y connectors.
If it make sense could you help me out!
I don't think thats very expensive at all for what it is. StreetWires makes very good cables and that is their top line of interconnects. Not to mention those are 4 channels @ 20 ft. long.jesus- find anything more expensive?
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7958030992&category=38636
that would do exactally what you want. now if they only sold 6 channel.
okay now I got it!Those cables on that crutchfield page are 4 channel rca's. Meaning that the other end of that cable there are 4 rca's just like whats in the picture. Notice how there is 2 reds and 2 blacks but they are marked a little bit differently. That is so you don't get them confused with one another.
You either need a set that has 2 plugs one end and 4 on the other or do what req said to do.