4 12" american bass xfl off of 3k in mavigator

[305Nasty]

Can anyone provide a box plan w cut sheet please. It will be going in a 2000 lincoln navigator powered by a rockford t3000 @ 1 ohm. Would like to keep it at 51" lenght 18" height and 26" depth but am flexible on the height. I mainly listen to rap but enjoy other music aswell. 34 hertz I think would be good. My electrical is good and I am not going to any competitions. If I am missing anything please ask

Click to read more...

 

[The_Dealer]

I'm working on something for you.

Sent from my SM-G900A using Tapatalk

 

[305Nasty]

Thank you sir

 

[The_Dealer]

Here you go. It's 8.12cuft@32.08hz (net) & 127.88sqin of port(15.75sqin per cube). I didn't have time to include any bracing, but you'd want to add some once you figure out sub placement. You shouldn't have to worry about pushing them too hard, you'd need about 6500w before you have to worry about speaker damage.







Sent from my SM-G900A using Tapatalk

 

[305Nasty]

Thank you I will let you know how it sounds once I get it done

 

[The_Dealer]

Cool, make sure to take pics during the build and post them up

Sent from my SM-G900A using Tapatalk

 

[CSCStang]

Nice design man.

 

[macsdad 10+ year member]

I concur, also want to see pics dude.

 

[The_Dealer]

Nice design man.

Thanks man! It should turn out pretty good for the OP, can't wait to see some build pics.

Sent from my Motorola 2950 Special Edition Bag Phone

 

[305Nasty]

In the process of building the enclosure couldn't get many pics I was real busy at work today. Got most of the cuts done today missing the second baffle, back and cutting the 45° s on the 6" boards I'm off tomorrow but hopefully will be done Friday or Saturday

 

[305Nasty]

Coming along nicely.. possibly done Tuesday

 

[big scott]

looking good.

 

[305Nasty]

Got the sub cutouts done today using my plunge router with home made circle jig. Just placed it on top to get an idea of how it's going to look. Couldn't get the rest of the mdf today or I would'very gotdone building today

 

[big scott]

post a vid when you get it playing.

 

[The_Dealer]

Looking pretty good man, especially using a circular saw and jig to cut it. I had to do it before I got my table saw. I couldn't get it to work out that great, I didn't have the best circular saw skills. I started to have Home Depot cut it big and use flush trim bit to get rid of overhangs. I agree with big Scott said, post some videos when you're done.

Sent from my SM-G900A using Tapatalk