3 xxx 18's sealed or 2 ported

What's an RPL?
RL-P, my bad

To who ever say said I have no install knowlege, ur trash. If you're clever enough u can figure out how fit 3 xxx's in an LS.

Just because it hasent been done before doesnt mean it cant be done.

I just wanted some of your opinions, i respect some of the ideas some many of you have.

 
well the time is coming soon.

I keep goin back from 2 ported to 3 sealed.

to be honest i dont know which setup will put up better numbers on TL

2 ported will be in 7.5 cubes each tuned 31-35. Each off an orion 2500D --- 5000rms

..ported add 6 db

3 Sealed 4.2-5 cubes each off an orion 2500D -- 7500rms

another sub + 2500 rms-- add 4.5 db

Thats just a generalization, but the ported might actually get louder with one less xxx and 2500 less rms.

opinions?

 
if all that u care about is numbers, why did you buy so many xxx's.

you will not fit 3 subs in there. hell u wont fit 2.

i saw an LS trunk today and u will need to build in the trunk to have 1 ported in there.

1 xxx18 will perform better just bcuz it has more space to breathe, stuffing shit in the ricer style will just make it worst.

 
if all that u care about is numbers, why did you buy so many xxx's.
you will not fit 3 subs in there. hell u wont fit 2.

i saw an LS trunk today and u will need to build in the trunk to have 1 ported in there.

1 xxx18 will perform better just bcuz it has more space to breathe, stuffing shit in the ricer style will just make it worst.
naw dont be a dream crusher like that. take out the spare tire and u'll see all the extra space. Also see how much space you can gain by taking off the rear dash.

OK 2 ported

 
I think 2 ported is do-able, but it will be a challenge. You are going to have to make some serious mods if you want to do it right. I think if you take your time and do it right it can be a great setup.

 
2 ported, chinny stfu, i've seen you're work before.

fiberglass the bottom and do a false floor style top, you should get enough space to make em bump, port through the rear deck, make the ports come outside the box so you can capitalize on port volume for a high tuning, and not lose any/very little box volume to the port.

 
2 ported, chinny stfu, i've seen you're work before.
fiberglass the bottom and do a false floor style top, you should get enough space to make em bump, port through the rear deck, make the ports come outside the box so you can capitalize on port volume for a high tuning, and not lose any/very little box volume to the port.
Who the **** are you? What work? Eat my shit noob. The first box i ever did i tried to do a snailshell and it came out like shit, awsome. And the LS trunk isnt that tall man.

 
is it necessary to have 18" sub(s)? no...then just try to get even one in there and see what kind of room you have left over...Imnot seeing them fit but if they do its gonna be **** loud...alot of fiberglassing then i could see them fitting better but yeah...have fun

 
is it necessary to have 18" sub(s)? no...then just try to get even one in there and see what kind of room you have left over...Imnot seeing them fit but if they do its gonna be **** loud...alot of fiberglassing then i could see them fitting better but yeah...have fun
I dont see the need for 3 18's in a trunk.......even if they were able to fit. //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

BoominBeast

Banned
Thread starter
BoominBeast
Joined
Location
MI
Start date
Participants
Who Replied
Replies
96
Views
3,530
Last reply date
Last reply from
BoominBeast
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top