3 RD Heavyweight 15s dual 1ohm

daddy_j
10+ year member

Senior VIP Member
Item(s) for Sale:

PLEASE ONLY POST IF YOUR WANTING TO BUY.

3 RD Heavyweight 15s dual 1ohm. The only resaon I am selling is because I need dual .5ohms. Only trade will be for either 3 RD Heavyweights dual .5ohms, or 3 Atomic APX 15s dual .5ohms or dual .35ohms.

Item(s) Description/Condition:

3000-4000 watts RMS

25mm tall top plate

25mm tall t-yoke

Paper cone highly damped with Kevlar fibers

Tri layer wide roll surround foam

Dual stacked 1” tall by 9.25” in diameter magnets

Tall titanium former

3” extreme temp 8 layer voice coil

Resign impregnated poly cotton spiders

Cast basket

Spiders bolted down to cast basket

Triple joint re enforced

15″

FS: 44.7 HZ

RE: 3.6 OHM

QMS: 9.6

QES: 0.412

QTS: 0.395

RMS: 11.05

CMS: 0.0334 MM/N

MMS: 378.26 G

BL: 32.14 TM

SPL@1W: 91.83 DB

VAS: 37.83 L

XMAX: 15 MM

XCOIL: 55 MM

Oh coarse one got the screw hole threw the surround, but black silicone took care of that. Doesn't affect the performance at all. Still stiff and still working 100%. One of them, the push terminal broke free from the other one, and I used epoxy to put it back. It does not affect the performance at all. I still manage a 158dbs with one pf600 amp.

Price:

$425 shipped for the perfect one, $400 for the one with the silicone and $400 for the one with the epoxy. I only want to sell all three, so if you want one, then we will have to wait for the other 2 to sell and vice versa, or $1200 for all 3 shipped. If your local and come pick them up, I'll throw in a mojo motor, it is from the 2009-2010 Mojo15Q1 sub (all it needs is a bolt on recone).

Shipping and Miscellaneous Item Information:

included in price.

Item Pictures:

imag0012.jpg


imag0013.jpg


(List pictures in this section, 1st picture should be your username/date if you have less than 10 positive feedbacks with the i-Trader system or less than 10 references that you have sold to in the past. (These must be listed in your signature, or a link provided to a feedback thread listing these references)).

 
I was referring to your "decent sub" remark. and "all in all good subs not great". These are better than any other sub on the market, especially if you throw in the price factor. Only sub that can compare to them are the atomic apx sub, only because they are the same same sub.

 
lol id any day take a incriminator audio warden any day over a RD so yeah in my eyes sure they are just a good sub i dont find them great //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
thats funny because these subs hold more world titles currently (in non mod classes) than any other brand. Steve had a problem with a component he decided to use on his amps. Then he decided to burn people. These subs vs DD9515 dual 1s were .4ohms louder than the DDs. Same box same amps, and same batts. Against memphis mojo 15s, these were 1 db louder.
I never knew a sub could be louder in its ohms? i think you meant Dbs..

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Yeah if you want to be loud and don't mind losing the back seat start looking into building a wall. B pillar wall. Gives you lots of room for...
6
897
I don't know, maybe two 12's and two 15s on a IB wall maybe? Lol!
2
791
You may need to go to some shows and sound offs/meetings
12
1K
  • Poll
I have those specs but the actual order layout is sketchy if u go out of spec a lil ur toast
7
2K

About this thread

daddy_j

10+ year member
Senior VIP Member
Thread starter
daddy_j
Joined
Location
san antonio, tx
Start date
Participants
Who Replied
Replies
21
Views
2,311
Last reply date
Last reply from
daddy_j
20240518_170822.jpg

Dylan27

    May 18, 2024
  • 0
  • 0
20240517_190901.jpg

Dylan27

    May 18, 2024
  • 0
  • 0

New threads

Top