3 in each door?

[Bassin Buick]

Dayton Audio DC200-8 8" Classic Woofer
1.2 cubes for 2......-3db at 60 hz

nice! i got .4 cubes with a f3 of 75hz (which is all i really need)!! maybe i will try these??

 

[CHEMMINS 10+ year member]

For the price....you really can't go wrong.

 

[Bassin Buick]

i think i'm gonna go with them. i gotta sell a few computers on CL then i will prolly be getting these. Any good recommendations on tweeters? i already have 4 of these and was prolly gonna use them. (one set low in the pods , and one set low in the a-pillars)

Vifa BC25SC06-04 1" Textile Dome Tweeter

they get loud as **** on small power and still sound good doing it. will get 45 each off of my hifonics hawk.

 

[CHEMMINS 10+ year member]

I'd only use 1 set.

But what are ya gonna use to fill mid from 1000 hz to 3500 hz?

 

[Bassin Buick]

also was thinking i may try these Dayton Audio SD315A-88 12" DVC Subwoofer behind my seat in a sealed box getting 165 each off my usacoustics 4065.

 

[Bassin Buick]

I'd only use 1 set.
But what are ya gonna use to fill mid from 1000 hz to 3500 hz?

well i hadn't thought of that because the midbass drivers i was looking at before went up to 3K. LOL.

well i guess i better keep searching. LOL

 

[CHEMMINS 10+ year member]

Use those subs, the 8" midbass, XXXX for mids...and one set of tweeters. Nice active setup.

 

[Bassin Buick]

I'd only use 1 set.
But what are ya gonna use to fill mid from 1000 hz to 3500 hz?

just took a look at the spec sheet on those dayton classic 8". there is a HUGE dip in response between 1k and 3K. LOL. gotta try something different then. i don't wanna run a 3 way front stage and that would alomst be a must if i used those woofers.

 

[CHEMMINS 10+ year member]

You wont find a decent midbass that plays well up to 3500 without major ripple. You could however get a full range, and play down to 1000 hz....something like these:

http://www.hybrid-audio.com/Legatia%20L3.pdf

 

[Bassin Buick]

maybe run a passive crossover between the mid and tweet and still use the hawk to power that setup? mid and tweet in the a-pillars?

 

[Bassin Buick]

You wont find a decent midbass that plays well up to 3500 without major ripple. You could however get a full range, and play down to 1000 hz....something like these:
http://www.hybrid-audio.com/Legatia%20L3.pdf

hat is too expensive. i'm working on a very tight budget. i'm looking for good but cheap. LOL.

 

[CHEMMINS 10+ year member]

Yeah...passive mid/tweet......run the midbass seperate, and the 12's

 

[Bassin Buick]

gonna have to do that. i only have the 3 amps and no room for more amps. LOL.

LMAO go here and click the link for the specs sheet. FAIL!!!

Tang Band W4-1052SD 4" Driver 4 Ohm

 

[Bassin Buick]

how about these for mids? Dayton Audio RS100-4 4" Reference Full-Range Driver 4 Ohm

 

[CHEMMINS 10+ year member]

gonna have to do that. i only have the 3 amps and no room for more amps. LOL.
LMAO go here and click the link for the specs sheet. FAIL!!!

Tang Band W4-1052SD 4" Driver 4 Ohm

Errrr.....nice horn?