3 in each door?

[Bassin Buick]

Bravox WFR-06BV03B 6-1/2" Silver Cone Shielded Woofer 12 Ohm

think they would be decent??

Click to read more...

 

[Bassin Buick]

BTW , they would be running bandpassed off of a hifonics eagle bridged to 2 channels.

Would go in a sealed fiberglass pod below the door panels in my truck.

 

[Bassin Buick]

nobody at all??

 

[CHEMMINS 10+ year member]

Meh....bravox are usually overpriced....but those are cheap.

High qts though....not too cool for doors.

 

[Bassin Buick]

gonna be in a sealed fiberglass pod. high qts usually needs small sealed enclosures right? I'm not too hip to the t/s stuff.

 

[CHEMMINS 10+ year member]

high qts = big box

 

[CHEMMINS 10+ year member]

2.47 cubes needed for 3 to have a flat roll off with -3db at 80hz

 

[Bassin Buick]

ran the t/s through bassbox pro. gives me a f3 of 100hz with 3 of them in .5 sealed with heavy poly fill. Not that bad.

 

[Bassin Buick]

2.47 cubes needed for 3 to have a flat roll off with -3db at 80hz

OUCH!! thats huge!

 

[CHEMMINS 10+ year member]

Yep.....they are made for HT usage....

 

[Bassin Buick]

so i need to be looking for low QTS?? i'm trying to do a multi woofer setup in the doors with some of the buyout type speakers. something dirt cheap but still good quality. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[CHEMMINS 10+ year member]

https://www.madisound.com/store/product_info.php?cPath=45_228_256&products_id=8405

Run 2 in each door.....better bet. 1.63 cubes for 2.....to get a -3 db at 80hz

 

[CHEMMINS 10+ year member]

These are what I wanna run....

Peerless 831735 6-1/2" HDS Driver

1 cube for 2 to tune to -3db at 70 hz.

Could go slightly smaller box and gain a lil before roll off.

 

[Bassin Buick]

i've been thinking about those too. but if i go with 2 per door i'm gonna go 8" because i have the room for bigger mids. were talking about a '85 F-150 here. LOL

prolly just stick with my original plan to use 2 8ohm silver flutes per door. any 8 ohm 8" models you think i should look at? remember i'm not running gobs of power only about 150x2@4 for the mids.

 

[CHEMMINS 10+ year member]

Dayton Audio DC200-8 8" Classic Woofer

1.2 cubes for 2......-3db at 60 hz