3/4" will still work right??

[danteBirosel 5,000+ posts]

Do i need any kind of bracing of some sort to put one 12" Mmatts Juggernaut in a 3/4" MDF enclosure?

It should hold up right?

-Dante

Click to read more...

 

[ramos 5,000+ posts]

how big of an enclosure and how much power? most likely you will //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[danteBirosel 5,000+ posts]

http://www.mmatsproaudio.com/juggernaut.htm

Its for a friend, maybe ~3-4cu ft, 1200w of powa..

What kind of bracing?

 

[Chevyaudio 5,000+ posts]

Yeah, bracin might be a good Idea. I have a 4 cube enclosure for My HT setup, and I braced it with a few MDF triangles

 

[Big-Cat 10+ year member]

yeah my older bro had a 12'' re xxx and he used 3/4in 3years ago. now it has cracked the whole side of the box that holds the sub. u will prob need bracing

 

[danteBirosel 5,000+ posts]

What kind of bracing would you suggest for this kind of enclosure/sub?

 

[NhustlaR 10+ year member]

scrap pieces of mdf, wooden dowels, anything bro. //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[ramos 5,000+ posts]

Well sir, you can go nice and clean like such

Or you can use some scrap, rod, or dowels. I wouldn't use dowels with so much surface area though. The dowel itself doesn't have much surface area. With threaded rod you can get larger washers for more surface area. But in wooden enclosures I prefer to go with mdf bracing. I'm an old dog, new tricks don't come easy //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif