2009 Subaru Legacy Build log

[smgreen20 10+ year member]

Looks good, the only thing I would've done differently is in the box. I would've routed a 1/8" groove on the back side of the front panel around the oval opening and sandwiched the carpet between the 2 panels. That would clean up the inner edge on the sub baffle. But again, looks great.

 

[itsblown 10+ year member]

anyone have thoughts on if deadening the rear deck will make the sub not as loud?

 

[itsblown 10+ year member]

TONS and TONS of deadening pics. Also little tip to you all If you're installing deadener Get a roller! I tried putting it on and smoothing it out with my hand bad idea that stuff is sharp!

Looks like a trunk lid is in need

Nice crispy clean stripped trunk

Doing the side walls! probably the weakest or thinnest metal on the car

Getting the trunk lid done

working on the floor

 

[itsblown 10+ year member]

Wrapped the spare well Decided not to do the part where the tire sits because the weight from the spare and amp rack should be way more than enough to keep that pannel from ressonating. IT also had a cote of liquid deadener from the factory.

A nice finished trunk

Putting it all back together

Time to do the back doors and also a little update as far as the substage goes. He wants to go even bigger and run 2 sa-10s off of a crescendo 2000.1 and get a pair of CDT 6.5 comps on a crescendo 1100.1

 

[121jiggawatts]

Cdt 6.5 comps and cdt midbass in the rear on a 1100.4 and the 2 10's off the BC2000D.

Im also thinking about doing the 2 sa-8 v.2's again