$200 in PayPal, need HU, amp, or install gear

[Pr0d1gy 10+ year member]

Well my other thread isn't going the way I wanted, so here is what I need:

Head Unit (anything from the Elite 880 to an AVIC Z1, tell me your asking price w/shipping)

Amp (anything that can run 2x200-250w @ 4 ohms, price + ship)

Install gear (i.e. anything that is a necessity to hook up a nice system in my car, have nothing, need cables & whatever else)

Box (IonSQL can't seem to find measurements for my car, but if you want to make a bid for it the box would be for a Magnum 12" D2 and needs to fit in a 1998 TransAm)

Click to read more...

 

[jeeper07 5,000+ posts]

as far as install gear i got 20 ft of 4 gauge, estoric rcas 20ft brand new, remote wire 22ft, battery terminals, loc, and distribution block ... let me know if interested also have a head unit premier deh p660

 

[baseballer1100 5,000+ posts]

Well my other thread isn't going the way I wanted, so here is what I need:
Head Unit (anything from the Elite 880 to an AVIC Z1, tell me your asking price w/shipping)

Amp (anything that can run 2x200-250w @ 4 ohms, price + ship)

Install gear (i.e. anything that is a necessity to hook up a nice system in my car, have nothing, need cables & whatever else)

Box (IonSQL can't seem to find measurements for my car, but if you want to make a bid for it the box would be for a Magnum 12" D2 and needs to fit in a 1998 TransAm)

You could do the measurements?

 

[dleccord 5,000+ posts]

ill give you my 9831 for 100 shipped.

 

[Pr0d1gy 10+ year member]

You could do the measurements?

The very bottom can hold a space of 19" wide, 22" tall, and about 12" front to back. Now, there is a second deck which may be more advantageous. It is up to 36" wide, but the bottom of the box would have to fit in a minimum 28" space to avoid falling into the first, or bottom, deck or level of the hatch. Obviously this could be achieved using some bracing or something, and I'm sure you would know more about how to deal with it than I would. You would have 13&1/2" of depth to work with in this space, but the rear latch would be in the way a little bit. The latch sticks out about 3" into the rear hatch space from the back of the car & is oddly shaped. It sticks out for 3" for about 3 or 4" down from the top & then it tapers down from there. Again you would still have the 12 or so inches to work with front to back here.

 

[jeeper07 5,000+ posts]

novel^^ hehe

 

[zachzchw 5,000+ posts]

I have some knukonceptz kolossus 1/0 in black/silver.

How long of a length do you need?

And what is an elite 880? Never heard of it, just curious.

 

[Pr0d1gy 10+ year member]

Elite 880 is the Pioneer Elite PRS880 or whatever.

 

[jeeper07 5,000+ posts]

any interest??

 

[krouchchocolate 10+ year member]

http://www.caraudio.com/forum/showthread.php?t=181367

 

[Pr0d1gy 10+ year member]

any interest??

Well, I need wiring of course, not sure about the rest. This will be my first install, so I don't know if I will need the terminal & whatever that other stuff is. The system will be running around 1500w after install if that helps.

As for the alarm, I'm sure it is killer and I will need to get one eventually, but the car has a decent one built in and I'm trying to keep the initial costs down, so it will have to wait.

 

[chibahawk 10+ year member]

http://www.caraudio.com/forum/showthread.php?t=181284

theres a good deal there =)

 

[jeeper07 5,000+ posts]

what about the hu??

 

[Pr0d1gy 10+ year member]

Listen guys, the reason I asked for the 880 is because it can run a 3 way active setup. Now, I don't think any of those that have been offered can do that, but I will keep them in mind in case I decide to go away from the active setup. The screen on that Panasonic is cool. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[Mac11 10+ year member]

orion xtr9002

225 X 2 @4

450 X 2 @ 2

900 X 1 @4

250 shipped.