30Hertz 10+ year member
Member
Alright, I know I recently put back in my 15" Brahma, but I wanted to try a dual 8 set up. Might go triple 8 but trying two for now to see how it'll sound.
(2) SA-8s
1.2^ft net after displacements at 25hz with 20 sq inch of port area (trying port pointing to the rear)
Got way more power than I need for two of them off a Orion 2500d
Onto the build thus far. Doesn't look like much yet, but we'll see...taking my time in between work.
Just for shits N giggles I'm going to paint the interior white and putting in a plexi window to see the motors. Also have my trim panel rings cut for the top, going to put a layer of glass to flush the subs and will be finished in Vinyl.
There's a separate internal wall that I had to put in so I could get the proper ^ft otherwise it would have been to large for only two of the 8's.
I should be doing more soon.
(2) SA-8s
1.2^ft net after displacements at 25hz with 20 sq inch of port area (trying port pointing to the rear)
Got way more power than I need for two of them off a Orion 2500d
Onto the build thus far. Doesn't look like much yet, but we'll see...taking my time in between work.
Just for shits N giggles I'm going to paint the interior white and putting in a plexi window to see the motors. Also have my trim panel rings cut for the top, going to put a layer of glass to flush the subs and will be finished in Vinyl.
There's a separate internal wall that I had to put in so I could get the proper ^ft otherwise it would have been to large for only two of the 8's.
I should be doing more soon.