2 15" RE SE Box help.

[z0n3d0u7 10+ year member]

Im needing a box design for my 2 15" RE SE's. By RE's calc, I dont have enough room to give them the 3.0cuft^3 ported. So i want to go with 2.0cuft^3 per chamber. I cant find a good box calc with a cutsheet / Diagram [Ever since Subwoofertools.com went offline.]

I can fit a box up to

40" Wide

20" deep [if any number was to change, Id prefer it to be this one.]

and 16.75 tall. [This will have to be a "Top peice", So that the boards are strong enough for the 14" mounting hole. I Also plan for this to be "Double baffled".]

IF needed, I could pay someone. But id prefer a little hook-up, As itd be a big hassle to get you paid [Probably have to be threw M/o / snail mail. As i dont have "access" to Paypal.]

Just let me know if anyones willing to do a simple design. Thanks.

Sub specs can b found here: http://reaudio.com/specs.html#sp_se

Sub Displacment = .17cuft

Vas: 209 liters

Click to read more...

 

[z0n3d0u7 10+ year member]

Ive been doing some playing, And this is what ive come up

with.

34 W x 16.75 D x 16.75 H = 4.367cuft^3. I was aiming for 4.34cuft^3. Will this be close enough?

Also, Before i make any cuts, Can someone check this "Cutsheet" and tell me if it looks like itd work [This is my first box design! sorry.]

BAFFLE AND BACK OF BOX = 3 @ 34" x 16.75" [3 because of double bafle. Ill also be nailing the facia board to the "Depth boards" so that i can have enough room on either side of my mounting hole.

Side's, And Seperator = 3 @ 15.25" x 15.25" [Left, Seperator board, right.]

Top and bottom 2 @ 15.25" x 34" [Will set ontop, and under the boards above, But be screwed into from the Baffle boards.]

It looks good on paper, but id prefer someone tocheck my work before i go cutting wood.