1994 toyota

should be 4" front and 5.25/6.5 rear (with aftermarket bracket) and you can only fit very shallow speakers in the rear. I managed to stick 6.5" in the front though //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 
i have a 94 corolla and in the front there is stock 4" and in the back there should be 5 1/4 or 6 1/2 but in the rear u should be able to put 6x9's because under that covering there should be holes for 6x9's. in the front is a different story.... i bought some 6.5 components and took them to get installed because i didnt wanna messs with it but they said it couldnt be done with my doors becuase they were to big.. well i went home and did it myself and it looks **** nice. so it is possible to put as big as 6 1/2s it just takes a lot of messing around it took me about 2 hours per door. email me if u have any questions about it.

 
on the bottom of my door i cut out half of that speaker grill looking thing and i used long screws to mount the speaker to the frame and the speaker fits in the hole that i cut out and slides up with the grill on it and the carpeting is under it so it looks pretty nice. then i put trim on the plastic that i cut. i can show pictures if u want just ask

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

leeber

10+ year member
Member
Thread starter
leeber
Joined
Location
goodview
Start date
Participants
Who Replied
Replies
5
Views
4,137
Last reply date
Last reply from
Tom88x
IMG_20260515_202650612_HDR.jpg

sherbanater

    May 15, 2026
  • 0
  • 0
IMG_20260515_202732887_HDR.jpg

sherbanater

    May 15, 2026
  • 0
  • 0

New threads

Top