1985 Mustang GT

  • 3
    Participant count
  • Participant list

sturgg

Junior Member
427259_10151494474886063_380502400_n_zps0f0c7569.jpg


It's been a long time since I've been on here. I sold my old civic to get this.

IMG_2318_zps35ce2c03.jpg


After over a year of rolling around listening to this I decided it was time to upgrade. I wanted to keep it in the car because I thought it was kind of cool that it still had the stock radio but enough was enough. I'm a basshead and need my music. My buddy gave me a head unit so I decided it was time to get to work!

I pulled the old one out and the hole in the dash was a little too big. After fighting with a sheet of abs plastic I ditched that idea and my dad and I made a trim ring out of 1/4'' MDF.

A997316F-0177-4821-B8AC-1918934FD3C0_zps0dqi4agr.jpg


And I found some nice black vinyl...

D1864768-D457-42BD-9B00-DDAD34F83F0C_zpsdtocnges.jpg


And wrapped it up so it looked like this.

40558066-6199-42DA-8494-98CB8E54DFAC_zpspajmr4or.jpg


This was my first time doing anything like this and I think the finished product looks pretty good.

EAA671EF-B32C-4B45-A8E5-A03ACF44F941_zps7zete4ez.jpg


F38A29D5-A7DF-4F7E-B46D-194E175C3A6D_zpsb8uq2s4d.jpg


After I got that in I pulled off the dash pad and installed some Polk 3.5's

35F53D37-2776-4B50-8B38-21D64E46D8FE_zpszly2n763.jpg


94881599-7932-4F30-BE6A-2DA80E6932B9_zpsfoxuiua7.jpg


The plan is to get some matching Polk speakers for the rear and to do a pair of 8'' Subs (to keep weight down) on around 500 watts! Let me know what you guys think!

 
Okay so I'm going to go with a ct sounds m750d amp... I have a sealed box for two tens laying around so I could go with two ct sounds tropo v1s wired at 2 ohms... Or I could buy a sundown e10 and wire that at 2 ohms... I would build a sealed box for it... (I don't want to go ported). What would you guys do?

 
Okay so I'm going to go with a ct sounds m750d amp... I have a sealed box for two tens laying around so I could go with two ct sounds tropo v1s wired at 2 ohms... Or I could buy a sundown e10 and wire that at 2 ohms... I would build a sealed box for it... (I don't want to go ported). What would you guys do?
I don't think you could go wrong with either choice.Every Sundown product ive used has been quality.CT i haven't used yet.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Could not tell you, but you may want to start by going to crutchfield and get a consensus on the 7 or so replacements they recommend. That average...
1
728
Might not even be an issue if you don't have any really big panels on it. Otherwise dowels or threaded rod across your wide panels would be the...
18
3K
I ordered the car with the upgraded B&O audio system....turn's out Ford bought the name but they didn't buy the quality. The system ****** to me...
0
939
Contact ANS he has a used Focal 8 Channel DSP that went for 1,300 bucks and is selling used I think shipped for 450. And from what I have seen and...
13
2K

About this thread

sturgg

Junior Member
Thread starter
sturgg
Joined
Location
cincinnati
Start date
Participants
Who Replied
Replies
4
Views
1,801
Last reply date
Last reply from
Staynlean
20240518_170822.jpg

Dylan27

    May 18, 2024
  • 0
  • 0
20240517_190901.jpg

Dylan27

    May 18, 2024
  • 0
  • 0

New threads

Top