15l7's In A X-cab Truck

[supraman1379 10+ year member]

Supraman,
Is Your Truck A 4 Banger Are The 6 Banger??

Does Your Seats Go All The Way Back??

Its a V6 3.0

I have all the clicks in the seat.

 

[j3bus2k3 5,000+ posts]

Subs up, port facing towards the seat in the middle and 2 amps. Run a run of 1/0 then hit a distribution block and run either 2awg or 1/0 again from their into amp A and B.

 

[LeofromtheH 10+ year member]

just do one L7 ported, 5ish is too small i think for two

 

[LeofromtheH 10+ year member]

this is my setup ATM, i plan on adding another L7 and 1200.1 and making an enclosire similar to supramans'. but i've got like 11ish cubes to work with so thats just about perfect

 

[dflw_99 10+ year member]

Yea I Looked On Ebay For Block And Found Like 300 Of Them

Can Someone Point Me At A Good One Thats Not An Over-kill

Thx

 

[dflw_99 10+ year member]

IS THIS A GOOD ONE?

http://cgi.ebay.com/0-GAUGE-INLINE-GOLD-ANL-FUSE-HOLDER-DISTRIBUTION-BLOCK_W0QQitemZ120029779066QQihZ002QQcategoryZ50551QQrdZ1QQcmdZViewItem

 

[dflw_99 10+ year member]

another question

to get the second amp to cut on would u have to run a remote wire to it too??

 

[tuck05 10+ year member]

You will only need one remote wire. Just splice it and tie into it for the second amp. Kinda like adding a distro block, but without the block. lol

Check out my cardomain page. That is my old setup. I am pretty sure you can fit two 15 L7's ported. B/C I fit two RE SX 15's in my Tacoma. Which should be around the same size as your Nissan. The box was HUGE. About 12 cubes or so.

http://www.cardomain.com/ride/2215599

 

[dflw_99 10+ year member]

thats nice but it didnt want to go above my back glass like that cause of cops saying it abstracts my view lol

cops around here are really, really hard on older teens/young adults

 

[dflw_99 10+ year member]

but say i do get them sealed with about 3cubic feet each. if the install is done right is 140db's possible:uhoh:

iam know iam bout to get flamed but i would like to know if thats resonable are what number is reasonable??

 

[luvinthebass 5,000+ posts]

this is my setup ATM, i plan on adding another L7 and 1200.1 and making an enclosire similar to supramans'. but i've got like 11ish cubes to work with so thats just about perfect

bet that setup ****in pounds //content.invisioncic.com/y282845/emoticons/eek.gif.771b7a90cf45cabdc554ff1121c21c4a.gif//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[Dtrickz 10+ year member]

i would never put a solo in a sealed box...i would get a different sub if you wanna run a sealed box

 

[dflw_99 10+ year member]

well how would 215L7's sound in a 8cubic inch sealed box with a kicker 1000.1 amp on each sub???

 

[boomzabit 10+ year member]

Face the subs up and port either up or forward.

My setup

 

[dflw_99 10+ year member]

ok guys first off iam about 100% sure iam want this in a sealed box. i just dont like the sound of a ported box. and yes i also know that L7 is a sq sub but a spl mainly sub. the reason iam going this big is b/c my first system was an audiobahn 12 sealed in a 1.75 cubic feet box doing 127.7 db's. that was loud for the first but after about a week it was lame. so iam goin allout on this system so i will for sure be loud enough for me. iam not plannin on pushing this sub for to thier full potential for more then 10minutes a day. mainly so ill have it and have a great system to add to another truck if i decide to trade are something.

ps i doubt ill listen to it that much just want to be able to be heard if i want to. so when the noob pulls beside me with his weak system i can blow him away with mine lol. i know "show off" but its fun.