12" type r vs 15" MB quart

0ld.Sch0ol.
10+ year member

Junior Member
i'm trying to put in my first sub and i've heard good things about both of these. which would you recommend? what are the ups and downs of each? or is there another sub going for around 120 that would be better? the S12L5's look nice... i plan on buying a zx400.1 amp as well. i'm not looking to spend over 140 on the sub.

thank you

 
i'm trying to put in my first sub and i've heard good things about both of these. which would you recommend? what are the ups and downs of each? or is there another sub going for around 120 that would be better? the kickers are nice... i plan on buying a zx400.1 amp as well. i'm not looking to spend over 140 on the sub.
thank you
The 12" type R could take more than that amp puts out.

 
hmm.. how about the ZX750.1? they have them for $190 on ebay... i would then have to get a 15" mb quart to stay in my budget though. anyone with experience with mb quarts? what's your opinion on them compared to type r's?

 
i can't afford 2 type r's, plus at 4 ohms wouldn't that be 150 rms a piece? and skyline said 750 watts would just do it... i don't understand how 150 could... but it doesn't matter, 2 type r's is far out of my budget.

 
i can't afford 2 type r's, plus at 4 ohms wouldn't that be 150 rms a piece? and skyline said 750 watts would just do it... i don't understand how 150 could... but it doesn't matter, 2 type r's is far out of my budget.
If you get one type R that is dual 2 Ohm voice coil you can wire it to a 4 Ohm load. That amp that he suggested puts out 600 RMS at 4 Ohm.

 
is having 600wrms at 4ohms better than 750rwms at 2ohms? more ohms with high rms = better? this is probally a dumb question, so i'll apologize in advance, but i'm new to this. i'm not sure what effect different numbers of ohms have on the subs...

also, sorry for not understanding your post kold killa, it makes sense now..

 
Cadence FXA-3001 does 500wrms at 2 ohms...I bought a refurb direct from Cadence with warranty for less than $60 shipped off ebay, and I think it actually does more than rated...I keep smelling VC on the ED 13Ov2 that is rated for 900rms I believe....Nice looking amp too...

 
Yeah. R's will be loud off just 500 RMS, but can take a little more. I don't think I would put 1,000 on a 12" though, but that's just me. It doesn't REALLY matter what Ohm you get your power from. If I'm thinking correct a higher Ohm load is easier on your electrical system.

 
If I'm thinking correct a higher Ohm load is easier on your electrical system.
ok... well then wouldn't the 750.1 be a better buy then the cadence? the cadence is much less expensive though... would there be much of a difference between 600 and 750wrms?

also, thanks for the help so far!

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

0ld.Sch0ol.

10+ year member
Junior Member
Thread starter
0ld.Sch0ol.
Joined
Location
Virginia
Start date
Participants
Who Replied
Replies
15
Views
1,100
Last reply date
Last reply from
0ld.Sch0ol.
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top