12" HDC3 and ab 500.1 *VID*

idk what its tuned to we just kept trying different length ports until it ghot as loud as possible but i know it is getting 3085 watts. i have the amp wired at .5 ohm. so the box is rising to 1.4ish
wow. nice rise! //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif got a few questions:

1) is the 150 with the door open? or completely sealed up?

2) what freq did you burp? or was it music?

3) can you get us some dimensions of the box, and a estimate on the port length? would be interested to see whats working for you.

dbdesignselite: why the bs? its a small cab truck with 2 15's and over 3k in power. look at tommyk. over a 150 with a single 10 and 2500w in his s10. that is at the kick though with the door open IIRC, but still, thats how he has to do it as his truck (as most) shut down when sealed up.

 
idk what its tuned to we just kept trying different length ports until it ghot as loud as possible but i know it is getting 3085 watts. i have the amp wired at .5 ohm. so the box is rising to 1.4ish
Thats about what i Clamped on the Saz3000D @.5... With the same reactive load...
I would like to apologize for raising that B.S. Flag... Killer setup for sure... You didnt have the Link up last night.... There is alot of people who Claim to pull numbers and shit... All and all sick.... Good work...

Now plans on strapping 2 3000d's in the future??? //content.invisioncic.com/y282845/emoticons/eek.gif.771b7a90cf45cabdc554ff1121c21c4a.gif

 
wow. nice rise! //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif got a few questions:
1) is the 150 with the door open? or completely sealed up?

2) what freq did you burp? or was it music?

3) can you get us some dimensions of the box, and a estimate on the port length? would be interested to see whats working for you.

dbdesignselite: why the bs? its a small cab truck with 2 15's and over 3k in power. look at tommyk. over a 150 with a single 10 and 2500w in his s10. that is at the kick though with the door open IIRC, but still, thats how he has to do it as his truck (as most) shut down when sealed up.

I am in no way saying its not possible... Just the way it was posted, i have seen it before... A 150 @ 30 cycles is somthing you don't see everyday out of 2 15's....There was no link to the setup... Should have just posted "PICS PLEASE" etc... I do apologize for the "Jump" on the post.... //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif My fault...

 
you should push it to 40 and let me hear it //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif
You wont be able to hear it on vid i dont think....i did it today even with the gain down...i forget what song...mighta been Soul Surivivor again haha

Ill get a vid tonight of it doing it....it is bottoming out...its not a slight noise its a "OMG TURN ME DOWN" noise:D:D

 
So i put it in last night at 4ohm for a bit....but annoyed me, so today wired to 1ohm
Now, my full tilt is set to around 45 out of 50 volume....when i get to about 40 it bottoms out, mechanical noise. Maybe from not breakin in or not...dk just yet

Most this video is with vol at 35

But after all that.......WOW....this thing is really soooo much more authority on the lows than i woulda thought.....its hard to explain really

When i had the BTL in at .5 in same box it was muchh louder and would not make any complaints about the power....and was nice on the lows...but the HDC its more like a wave of pressure than a musical note when it plays lows

Even at lower volume its just more feeling than the BTL, but not as loud, granted its 1ohm to .5ohm.....but again...only a few minutes of play time, still might need to loosen up a bit

Heres vid:



All just my opinion and based on my setup solely
What is the name of the 3rd song?

and here's mine i just got this sub today and decided to see how this thing sounds...my camera sucks and its on a hk401sx..i have really turned it up yet but it sounds pretty loud now..





 
**** lol... Need more back pressure on that cone!!!!!! Playing out of tuning??? It sounds to me like its bottoming out.....
Yes...haha...thats what i told George

Ahhh....not like crazy out tuning...its tuned to 40ish and playing what 32hz......dont know why it does that besides just asking to much from it:confused:

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

Skip01

5,000+ posts
Diggy
Thread starter
Skip01
Joined
Location
Marrero,LA
Start date
Participants
Who Replied
Replies
123
Views
8,028
Last reply date
Last reply from
Skip01
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top