(1) Sundown SAZ 2500D, (2) Alpine PDX 1.600, (1) Alpine MRD-M1005

tprice07
10+ year member

Junior Member
14
0
Iowa
1. Product:

(1) Sundown Audio SAZ 2500D

(2) Alpine PDX 1.600

(1) Alpine MRD-M1005

2. Specs:

(SAZ 2500D) - 2500 watts rms @ 1 ohm

(PDX 1.600) - 600 watts rms @ 2-4 ohms

(MRD-M1005) - 1000 @ 2 ohms

3. Description/Condition:

SAZ 2500 - 9.5/10 Cosmetic - one minor scratch by top left saz 2500 print, only noticeable in certain light (pictured below) 10/10 Mechanical, works great never any problems, doesn't go into protect and has always been run on good electrical with kinetik battery bank of 2400s.

PDX 1.600 - 10/10 Cosmetic, 10/10 Mechanical - Perfect Condition, like new considering they are used. They are very closely matched because they were purchased new at the same time, wattage should match on each amp if you wanted to run two together. One minor chip on one of the 4 caps, if you link them together they will be removed.

MRD-M1005 - 8/10 Cosmetic, 10/10 Mechanical - a few minor scratches, the cover is a little scuffed up but doesn't look bad, I thought about wet sanding the cover and polishing it up since it is aluminum, can most likely get a mirror finish on it.

4. Price: :

SAZ 2500D - $575-----NOW $550

PDX 1.600 - $200 (each)------NOW $150 each

MRD-M1005- $300 -----NOW $250

5. Pictures:

6547066345_c9216dd003.jpg


6547065283_3e33864848.jpg
6547047683_9b63f65bc7.jpg


6547067433_b1828a05f4.jpg


6547060849_ee6f6b58b6.jpg


6547058863_e4492d26e0.jpg


6547050755_452636ce03.jpg


6547052869_0aef761d42.jpg


Feel free to message me on here or email tprice07@gmail.com if my pm box gets full. All amps have been tested and verified to work prior to posting up on here. I can also order new Sundown Audio amps and subs so PM for quotes and I will do my best to forward you onto a rep/dealer if out of my area. Thanks!

 
Last edited by a moderator:
Are the PDX's kind of underrated? I'm running 2 12" CVR's and pushing them with a POS Pioneer. It's supposedly doing 600 rms @2 and it sounds decent but they need more power. Would the Alpine be a pretty big improvement or should I just maybe get a new Hifonics or Power Acoustik that'll give me 900 rms @ 2? Problem is I don't wanna upgrade electrical or anything and with the Hifonics 1200.1 I think I'd have to.

 
Are the PDX's kind of underrated? I'm running 2 12" CVR's and pushing them with a POS Pioneer. It's supposedly doing 600 rms @2 and it sounds decent but they need more power. Would the Alpine be a pretty big improvement or should I just maybe get a new Hifonics or Power Acoustik that'll give me 900 rms @ 2? Problem is I don't wanna upgrade electrical or anything and with the Hifonics 1200.1 I think I'd have to.
We clamped them at 760 watts rms at 12.7 volts. It has 4 20amp fuses so I would imagine it would be capable of 800rms. Feel free to pm me for price shipped. Also pdx is much more efficient and clean power than hifonics or power acoustik.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

You stated you have an SIA 3500 right now. I would run it for now with the supply for the demand, until you decide you want more power and have...
3
452
Wired to option #1 would be ideal for those subs. I have quite a few 10s. in the proper enclosure, tens can get down pretty good with the right...
10
1K
My wife is gonna sh!t bricks when my subs get here. She doesn't know yet
19
3K

About this thread

tprice07

10+ year member
Junior Member
Thread starter
tprice07
Joined
Location
Iowa
Start date
Participants
Who Replied
Replies
17
Views
4,254
Last reply date
Last reply from
tprice07
1715565471722.png

Doxquzme

    May 12, 2024
  • 0
  • 0
IMG_5880.jpeg

Brendon Jenness

    May 11, 2024
  • 0
  • 0

New threads

Top