1 ohm stable Mono amp. Two 2 ohm dvc. Help please

[acornejo129]

I got a hifonics Brutus

it is stable at 1 ohm

I have 2 alpine type r 2 ohm dvc.

Right now I have it wired series then parralel to get a 2 ohm load to the amp.

I was wondering since this amp IS 1 ohm stable and has 2 terminals,

can I wire each sub parralel to get 1 ohm load each and run each to the two terminals on the amp. Would I be getting a 1 ohm load?

Basically can I have the each sub wired parralel and connect each sub seperatly to each terminal on the mono amp?

Thanks guys

Please help. I searched everywhere can't find an answer.

Click to read more...

 

[misfit138 5,000+ posts]

The dual terminals are wired together internally.

You'll need to switch to dual 4 ohm subs if you want to obtain a 1 ohm load...

 

[Bumpin' Goalie 10+ year member]

You can run .5 ohm (not recommended) or 2 ohm.

You need two D4 or D1 subs to get a 1 ohm load.

 

[acornejo129]

thanks

so what ohm load would i be presenting to the subs if i did wiring that way?

 

[acornejo129]

to the amp i mean***

 

[misfit138 5,000+ posts]

2 ohms.