06 XXX Box Plan.. Come Check it out..

[Flipx99 5,000+ posts]

Your exactly right. The left side will be 1" shorter than the front,.

 

[mikey060 10+ year member]

im curious...is that the actual design 80 sent you?

 

[Flipx99 5,000+ posts]

im curious...is that the actual design 80 sent you?

I would say so. That is how mine arrived. I did not use the cut sheet however. I don't like how bbp6 puts boxes together.

 

[mikey060 10+ year member]

oh okay. yea i dont like the looks of the program used looks somewhat confusing

well the cutsheet atleast

 

[Flipx99 5,000+ posts]

oh okay. yea i dont like the looks of the program used looks somewhat confusing
well the cutsheet atleast

The bottom part is probably MS Paint.

 

[xluben 10+ year member]

yeah, bbp cutsheet's ****.

80 should have put the sub/port on one of the "side" walls (and adjusted the dimensions so that the sides were the biggest. then the cutsheed would have been better setup for adding in a port and not having the lopsided end piece.

or he could have just used the ported box designer (but i've found that to be a real pain).

FYI, i could have whipped up a box like that (with a proper cutsheet) on subwoofertools.com in about 5 min (and for free) //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[mikey060 10+ year member]

The bottom part is probably MS Paint.

lol...it better be

 

[Pyro_By_Nature 5,000+ posts]

80 is a guy that knows his $hit.

//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif :laugh: //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif :laugh: //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif :laugh:

Ohhh dude stop, you're making my sides hurt //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif :laugh: //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

He knows how to punch a couple numbers into a computer program, woohoo.

If that's the actual design he sent you, I feel bad for anyone that gets a box design from him //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif VERY unprofressional.

He can't even be bothered to spell "what" correctly.And the little drawing, lol.Port isn't even the same width all around. MS paint > him. Looks like one of jordan tyler's boxes.

 

[Mitch86 5,000+ posts]

I also felt that the plans I got from him were confusing and not very accurate. I actually had to point out several typos that confused the shit out of me. He wasnt very helpful when I asked questions either. I thought he was a respected designer around here though...I have no idea now. //content.invisioncic.com/y282845/emoticons/eyebrow.gif.fe2c18d8720fe8c7eaed347b21ea05a5.gif He did give me the plans before I payed and answered a couple of questions at first. Just got kinda sketchy after a couple simple questions. Not what I was expecting to tell the truth. But all in all, I have nothing agianst him I guess.

 

[Mitch86 5,000+ posts]

HAHA, I just noticed I've been quoted in someones sig...I feel all warm inside now.

 

[Pyro_By_Nature 5,000+ posts]

HAHA, I just noticed I've been quoted in someones sig...I feel all warm inside now.

When I read that, I just thought it was too god **** funny.I had to have it in my sig. lol.

 

[mikey060 10+ year member]

//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif :laugh: //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif :laugh: //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif :laugh:

Ohhh dude stop, you're making my sides hurt //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif :laugh: //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif

He knows how to punch a couple numbers into a computer program, woohoo.

If that's the actual design he sent you, I feel bad for anyone that gets a box design from him //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif VERY unprofressional.

He can't even be bothered to spell "what" correctly.And the little drawing, lol.Port isn't even the same width all around. MS paint > him. Looks like one of jordan tyler's boxes.

i thought the "and ideaof wat it will look like" was what the OP added incase we didnt knowwhat a ported box looks like LOL

 

[Pl8er 5,000+ posts]

How much does an 06 XXX cost? I'm pretty sure they are rather expensive. Why would someone who wants to spend so much money on a high end sub build a 45dollar box?

*shrug* just curious.

 

[Omarvelous 10+ year member]

Your a dumbass for not going over the plans first.....

IMHO..... u can do the math...right?

Like those ppl driving their cars into ditches because their navs said "turn right"

 

[Ford302Redneck 10+ year member]

I guess we need 80 in here to say his peace and everything...