0-4 gauge adapter question

[CAT MAN 5,000+ posts]

i have an mb quart onyx 1500. anyone that knows maxxsonics and other brands knows they have an angled power input. my question is. will these work

Knukonceptz product detail for SET SCREW GAUGE REDUCER 0 TO 4 GAUGE

or do i need a special one?

Click to read more...

 

[daboyfrumdabx 10+ year member]

From what I recall with my MBQ amps, I don't think you'd have enough room for these to fit. Perhaps if the amps were elevated and there was some empty space to spare beneath the terminals.

 

[kramer_212 10+ year member]

i originally bought those for my fosgates but the power/ground were too close so i just ended up soldering 4 gauge tips on 1/0 wire, cheaper and possibly better, only took 15 min to do 6 1/0 to 4 gauge.

 

[mylows10 5,000+ posts]

From what I recall with my MBQ amps, I don't think you'd have enough room for these to fit. Perhaps if the amps were elevated and there was some empty space to spare beneath the terminals.

^this tony

 

[CAT MAN 5,000+ posts]

frik..... well ill keep using the shaved 0 gauge .

 

[mylows10 5,000+ posts]

or put a ring terminal on the end of the wire and a nut and bolt into the amp

 

[CAT MAN 5,000+ posts]

or put a ring terminal on the end of the wire and a nut and bolt into the amp

only problem with that is the ring terminal fitting

 

[kramer_212 10+ year member]

[/img]

 

---------- Post added at 09:19 PM ---------- Previous post was at 09:19 PM ----------

 

not pretty, but mine are hidden anyways, it actually works good.

 

[CAT MAN 5,000+ posts]

if only i had some nice 4 gauge ....

 

---------- Post added at 10:20 PM ---------- Previous post was at 10:20 PM ----------

 

i could use a butt connector :/

 

[kramer_212 10+ year member]

if only i had some nice 4 gauge .... 

---------- Post added at 10:20 PM ---------- Previous post was at 10:20 PM ----------

 

i could use a butt connector :/

if you want i will cut 3 inch cuts of fosgate 4 just pay for shipping, it would be like $10 total. if even that.

 

---------- Post added at 09:23 PM ---------- Previous post was at 09:22 PM ----------

 

i also have scorchee efx 4 gauge if you prefer.

 

[mylows10 5,000+ posts]

what is said works then just tape it up ,you can drill out the hole on the ring terminal , i do it all the time

 

[CAT MAN 5,000+ posts]

what is said works then just tape it up ,you can drill out the hole on the ring terminal , i do it all the time

pics?

 

[mylows10 5,000+ posts]

let me see if i can find some

 

[mylows10 5,000+ posts]

all you do is put a ring connector at the end of your power and ground wires. put a bolt thru each one then add a nut and tighten it.tape the ring connector up and also all of the bolt that will not be inserted to the amp.easy.seen it done with multiple 0 gauge wires on stetsom amps in the past