wireing

I am using a line out convertor in my 2009 grand Cherokee and it worked perfectly for around two weeks and then suddenly stopped I have the amp hooked up to an eight inch kicker slim sub in a kicker wedge box I hooked the power and control up to a switch because for some reason the amp would not...

   ok I'm trying 2 find the best way 2 wire my 2 diferant amps and 2 different subs from my reciever       I have a Kenwood Kdc-302 which has 3 RCA outs but one is Sub then Front and Rear, I assume the Sub-Out puts out differant audio because on rear-out I can turn my gain up but when I plug it...

howdy, been trying to figure most this out threw google but have some specific little stuff i cant seem to nail down.my rig is being retired so i got a bunch of awesome stuff that needs to be relocated. my girlfriend has a 2017 fusion with sync and the sony system so i dont really want to ****...

Let me start with I am new to the car audio life and have a decent exposure to electrical work but some things I still dont quite understand and am avidly trying to learn. I have a 1200W Kinetic power cell for my system and the ground we put in running from the negative terminal to the chassis...

Q1) I drive a 2002 Honda Accord 3.0L V6 VTEC and I was wondering what size fuse I should put between my alternator and battery for the big three? I'm running the stock alternator and a duralast gold battery. Q2) I have a CB radio that plugs into the power outlet in my console, and when my car...

so i have 2 subs that i want to run 500 watts to each at 4 ohm, if i have an amp that does 1000 watts at 2 ohm i can wire them parallel and it will work?

hey i got 1 sony xplod 500w 4 chanel amp and a kdx audio (cheap one i suppose) 2x130w. my question is this; can i connect the two and have my speaker and sub running off both or should i have the speaker on one and the sub on the other... either way is it possible to conectthe two or do i have...

im doing a full system in my scion tc dyno mat and ill have a nav tough screen with a 4 chanul amp running about 75 to 100 watts per chanel and a mono block at about 3000 rms give or take 500 im planning on doing the big three and running all 0 gauge for big 3 and amps i need to know should i...

ok i will have 2 12"s and mids plus highs (2 amps, 2300 watts rms total) i will also have a power invertor (1000 watts rms) plus led lights in the car and underbody kit to. What should i do to the electrical system ? I have an HO 220 amp alt an stock batt. I really dont wanna hook up 2...

ok well i have 2 10" q power subs and 1 10" kenwood with a 1000w amp..wat would be the best way to wire it? by the way the q power subs came together in a sub box Q POWER 10" Subwoofer Box High Power 4 Ohm Subwoofers Grade A 5/8" MDF Construction Bent Plexiglass Window Subwoofer Chrome...

Ok here is what I have installed in my 01 Audi TT Coupe Audi Concert Model: 8N0 035 186 A Bose Sound System Model: 3511 Both came with the car from the factory. I wan to add a 12” sub in the trunk but I would like to keep the stuff I have in there already. The only issue is that the speaker...