Recent content by Curtonamis

I am having some serious trouble deciding what to do with my setup. To start, my electrical will consist of a northstar sms 480 and a kinetic in the front and a 300a HO alternator in my 2012 mazda 3 hatch along with 2 runs of 0 gauge to the back. I had an X 15 and then got 2 zv4 v2 12s from a...

I have an Orion HCCA 12.4 and I need an amp that is going to be enough to push 2000+ watts rms at 2 ohms. If it is used or new just give me some feedback I have been searching the Internet for 3 hours with no luck. I want it under $400 preferably. Don't care if its from a different website or...

Okay so I have a subwoofer box that I had custom made and I decided that my subwoofer wasn't powerful enough and decided that I want to get a new one but don't want to spend the money on a new box considering that I just bought it a couple weeks ago and I work minimum wage 25 hours a week. It is...

I read online that this person put his in a small box tuned to 30 hz and it slapped hard so I'm debating cause I have heard different things

I got an alpine type r 12 and an amazing box made from Starr Mountain Sound, I was flexing windows of a local business with just one 12 on less then 1000 watts. But I want to be able to safely stay that louder then 1500 now so I want to get an HDC3 12 and just put it in the box I have...

Any other suggestions? It's about 3 inches wide and 3 long

Okay so I was putting in my wires today and I took out the grommet that goes between the inside of the car to the outside (obviously). It is blocked off by the battery among other things and is high up so no debris gets in my car. But there is a little hissing sound coming out from the engine...

Okay thanks' that's what I thought but just wasn't sure.

Okay this may be a dumb question but its just a thought. I got a line output convertor and its 12v. And the amp I got says this: RMS Power Rating (14.4V): 580 Watt x 1 Channel @ 4 Ohm 725 Watt x 1 Channel @ 2 Ohm 1000 Watt x 1 Channel @ 1 Ohm RMS Power Rating (12V) 395 Watt x 1 Channel @ 4...

I am getting an alpine type r 1000 W RMS and I am getting an amplifier that is also 1000 W RMS. I am going to get a digital multi meter but I need to know if I should set my gain a little bit under what the multi meter reads or just stick with the exact amount. Also, the sub is brand new and I...

Well good news, I found out that the precision power amp IS 1ohm stable. That will be what I purchase. Thanks for then help everyone, really, you guys help out alot!!

Well I know the soundqubed is 1 ohm stable but I don't want to spend the extra 90 bucks if I don't need to

Okay well should I get the precision power 1000w RMS amp or should I go with the soundqubed? I don't see that the precision power amp is one ohm stable but I Haven't heard of any problems people having with it running on one ohm. And I would save around $90. And is there a way to run less power...

..

Well what's going to be the difference if I set it to one ohm instead of 4? Is it better sq at 4 and louder at 1?