Amp cuts out at low RPMs

  • 3
    Participant count
  • Participant list

ludvigandersson

CarAudio.com Newbie
I've had a Rockford Fosgate Prime R1200-1D with 2 12" P3s hooked up to my Golf GTI for about a year. Recently my battery started dying and eventually I replaced it. At the same time of my battery dying I noticed that my amp would start to cut out at low RPMs. Even with the new battery the amp still cuts out. If I am cruising along and let off the gas for any reason, the amp cuts out. I have tested my alternator and it seems fine, keeping about 12.4 volts when off and about 13.8 when idle. Could it still be the alternator possibly?

Anyone have any idea what could be the problem?
 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Amp
https://www.amazon.com/dp/B0CY6B119C/?tag=caraudiocom-20 https://www.amazon.com/dp/B0CBT1F2PY/?tag=caraudiocom-20
4
88
I agree with every one above. OFC is much better. Copper is a much better conductor than aluminum.
6
249
Pretty much. It's just a nice kit. A solo rite Scarlett 2i2, XLR mic and a loop back cable are my next purchases so I can get accurate phase...
10
370
One or two, they are still subwoofer outs and are mono summed signals from both left and right. Even the 2 RCA subwoofer pre-outs on the 2nd one...
3
365

About this thread

ludvigandersson

CarAudio.com Newbie
Thread starter
ludvigandersson
Joined
Location
Louisiana
Start date
Participants
Who Replied
Replies
3
Views
782
Last reply date
Last reply from
Popwarhomie
IMG_0503.jpeg

DEW123

    May 7, 2024
  • 0
  • 0
IMG_0489.jpeg

DEW123

    May 7, 2024
  • 0
  • 0

Latest topics

Top