~1000W amp suggestions

  • 3
    Participant count
  • Participant list
I have an Audiopipe APMI-1500 amp that is on the fritz that I need to replace. The amp keeps cutting in and out at random. It's not overheating and I've checked all wiring.

I have two 12" subs, Cerwin Vega VPRO124D that are rated for 700W RMS each. That figure is probably a bit overrated, but my APMI-1500 (supposedly 1400W RMS x 1) was about perfectly matched for them. So something in the range of 1000-1500W @ 1 ohm should suffice.

Anyone have any suggestions on a good amp? Looking for best bang for the buck, I don't need the absolute best, just something that will sound good that's reliable. Budget is $200 or under, give or take. Sonic has a Hifonics ZXX-2400.1D that seems appropriately sized for the right price, but I can't find any reviews or amp dynos online. Not sure about Hifonics quality these days. If anyone has any recommendations, I'd sure appreciate it!
 
Taram
I have an Audiopipe APMI-1500 amp that is on the fritz that I need to replace. The amp keeps cutting in and out at random. It's not overheating and I've checked all wiring.

I have two 12" subs, Cerwin Vega VPRO124D that are rated for 700W RMS each. That figure is probably a bit overrated, but my APMI-1500 (supposedly 1400W RMS x 1) was about perfectly matched for them. So something in the range of 1000-1500W @ 1 ohm should suffice.

Anyone have any suggestions on a good amp? Looking for best bang for the buck, I don't need the absolute best, just something that will sound good that's reliable. Budget is $200 or under, give or take. Sonic has a Hifonics ZXX-2400.1D that seems appropriately sized for the right price, but I can't find any reviews or amp dynos online. Not sure about Hifonics quality these days. If anyone has any recommendations, I'd sure appreciate it!

Taramps MD1800.1
 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

It would also be easy to add an equalizer to have individual rca inputs for all of the channels. A decent one can be had for less than $40...
6
152
  • Locked
NVX MVPA1 Best tiny amp Installed a bunch, but have one pushing a sealed 12 @ 2ohm in my daily beater Can bump it all day long and barely gets...
4
353
Amp
This tested well on youtube - not familiar with the brand but it is a pretty standard china build house amplifier...
5
348
I agree with every one above. OFC is much better. Copper is a much better conductor than aluminum.
6
400

About this thread

jedwards83

Junior Member
Thread starter
jedwards83
Joined
Location
St. Charles, MO
Start date
Participants
Who Replied
Replies
2
Views
716
Last reply date
Last reply from
BCotrell
20240519_201344.jpg

audiobaun

    May 19, 2024
  • 0
  • 0
Screenshot_20240519-213549.png

1aespinoza

    May 19, 2024
  • 0
  • 0

New threads

Top