mobbdeep
Member
Hello,
I recently wired the door speakers to the factory wiring with new door speaker wire, ran it straight to the back to hook up my amp which I didn't do yet. However, I have audio coming out of the front left door speaker but none from the others except static from the front right speaker. I know in my old car, once I unhooked the door speaker amp, there was no sound at all.
Anyway, how I wired it were the door speaker positives for a 2 channel setup, remote turn on to the remote turn to the radio and the remote turn on to the second amp.
Not sure what I did wrong or should I plug in the RCA's, power, speaker wire, and ground to the amp then see if it works as I have 2 RCA's in for the sub amp and 2 in for the door speaker amp.
I recently wired the door speakers to the factory wiring with new door speaker wire, ran it straight to the back to hook up my amp which I didn't do yet. However, I have audio coming out of the front left door speaker but none from the others except static from the front right speaker. I know in my old car, once I unhooked the door speaker amp, there was no sound at all.
Anyway, how I wired it were the door speaker positives for a 2 channel setup, remote turn on to the remote turn to the radio and the remote turn on to the second amp.
Not sure what I did wrong or should I plug in the RCA's, power, speaker wire, and ground to the amp then see if it works as I have 2 RCA's in for the sub amp and 2 in for the door speaker amp.
Last edited by a moderator: