what ohm am i running
- Thread starter southport2014
- Start date
- Replies 6
- Views 831
Oh6AcCoRd 10+ year member
they call me salad
2 or .5
and assuming that you have no electrical upgrades, due to the fact that you asked this, i strongly suggest running at 2.....
(no offense)
and assuming that you have no electrical upgrades, due to the fact that you asked this, i strongly suggest running at 2.....
(no offense)
+1, rather be a little quieter than blow your amp. Once you get a beefy second battery.. or 2. Try out .5ohm, but dont forget to reset your gains
sacsking916 5,000+ posts
stayin high an loud
lmfao how did you wire them?
- Thread Starter
- #5
i havent wired em yet i was wondering and im bout to get a 220 amp with the big 3 i ran but thank you for all the info and is this amp able to run at .5 ohm i really wish i could run it at 1 ohm
You can run it at 0.5Ω, but if you your electrical has troubles keeping up I wouldn't expect it to last long.
I would run at 2Ω to be safe. If you had either 2 D4 subs or 2 D1 subs you could run it at 1Ω.
I would run at 2Ω to be safe. If you had either 2 D4 subs or 2 D1 subs you could run it at 1Ω.
- Thread Starter
- #7
akrught thanks everyone for all of your help and btw would a kinetic 1400 be eniugh fir a 2000 watt system with the big 3 and 220 amp alt
Activity
No one is currently typing a reply...
Similar threads
It also lowers the amps efficiency and raises the current draw.
- Started by Paul Curtis
- General Car Audio
What is the impedance of each set of terminals,assuming they represent each of the two dual voice coil subs (4 coils total)?
How many sets of +/-...
- Started by tbcopeland1
- Wiring, Electrical & Installation
Not all chargers are the same and charge and different rates. Any battery will deplete in that type of weather if you do not crank the vehicle for...
- Started by Bluecarz77
- Amplifiers
FOR SALE
Taramps md3000.1 1 ohm new
Brand new
210 shipped
TECHNICAL INFORMATION
OPERATION CLASSClass D
NUMBER OF CHANNELS01
MAXIMUM POWER@ 12.6 VDC - 1 OHM: 3000W RMS
@ 12.6 VDC -...
- Started by mclerico1983
- Car Audio Classifieds
This is what I usually do before I put my main gear in. For my temp setups, Ill thrown in what I have close by out of my stash.
- Started by jeff47424
- General Car Audio
About this thread
- Start date
- Participants
- Who Replied
- Replies
- 6
- Views
- 831
- Last reply date
- Last reply from
- southport2014
Latest topics
-
-
Does rear speakers improves driver audio experience?
- Started by MicraMan
- Replies: 14
-
-
-
BOSS560RBG How to connect a sub, powered or otherwise.- Started by Carlos_510
- Replies: 3