Yet another QUICK question

[nickolas_j_t 10+ year member]

I have a JL 1000/1 and a JL 13 W7. Since it is a dual voice coil, would I need a 4 channel RCA cable for it?

Click to read more...

 

[jco1385 5,000+ posts]

lolz. no. mono amp = 2ch summed inputs (or one maybe)

you obviously havent thought much about this...

 

[99grandprixGT 5,000+ posts]

no

 

[nickolas_j_t 10+ year member]

Well, I will be using both wiring terminals in it (both pair of postive and negative). There are 4 spots for RCA in it.

 

[DB-Audio 10+ year member]

not really sure about jl 13's never used them but my subs are dual voice coil and have them run in series to 4 ohms

 

[nickolas_j_t 10+ year member]

I just planned on hooking each coil up to a positive/negative spot on the amp.

 

[blazeplacid 10+ year member]

Well, I will be using both wiring terminals in it (both pair of postive and negative). There are 4 spots for RCA in it.

the 1000/1 only has one set of in and out

one red (right) and one white (left) which is a pair labled "in"

and

one red (right) and one white (left) which is a pair labled "out"

 

[nickolas_j_t 10+ year member]

All i need is the "in'' correct?

 

[jco1385 5,000+ posts]

yep

 

[nickolas_j_t 10+ year member]

ok, so hook the 2 channel RCA to the "in" from the H.U.

 

[jco1385 5,000+ posts]

OUT from the HU IN to the amp...

think about the way the signal is traveling. it's simple stuff.

 

[nickolas_j_t 10+ year member]

yea thats what I meant. The out on the H.U. to the IN spot on the amp. What is teh OUT used on the amp for?

 

[jco1385 5,000+ posts]

yea thats what I meant. The out on the H.U. to the IN spot on the amp. What is teh OUT used on the amp for?

to go from there to IN on a second amp. aka daisy chain

 

[nickolas_j_t 10+ year member]

Thanks a ton Jco. I'm cleared up now! Thanks again!!!!!!!!!