Xenon400.1 Help

[tonyvlx 10+ year member]

Guys I just wired up my PG Xenon 400.1. Im using it with 12" Type R. When i turn the ignition key to "accessorie" postion the amp goes on.When i go ahead and turn the car on, the amp goes off and does not turn back on.I checked all the terminals with my multimeter and i do have voltage at main power and remote terminals.

I even tried getting the "remote power" from another sourse, but still does not turn on.

Seems like the amp will turn on,with the 1st "remote" current and then when the assesories shut off cause the car is cranking over, the amp does not come back on.

Any help would be appreciated. THANKS

Click to read more...

 

[Fordfool302 10+ year member]

what kind of vehicle is this in and also where exactly is your remote hooked to?

 

[tonyvlx 10+ year member]

Its a 2004 Mazda6. And my remote lead is tapped into the the remote lead that turns on/off the OEM sub amp.

 

[Fordfool302 10+ year member]

If u have an aftermarket deck try using the accessory lead thats on the deck itself, that should work for u.