1. Product:
4hp kits
Three ma motors
3" 4layer 3hp coils svc 4ohm
2. Specs:
D 3.5 dcr ohms
ID 3.890
OD 4.150
WH 2.470
-----------------
two hk15x2 motors
one hk12x2 motor
3. Description/Condition:
Kits are new set up for ti baskets. To be used on a tc 4hp motor.
One ma motor(15x2) is shifted and needs to be sent to David.
Other two are just fine. All three are the same exact motors besides the engraving on the bottom of the 12x2 and 15x2. One says 3000 watts other says 4000watts but are identical motors.
I can build all three ma motors to any size driver you would want besides a 10" as the motor is too wide unless you would want it like that. Obviously value of them will go up depending on size and what you want.
4. What you are looking for: :
1/0 wire, speaker wire and basically anything to do with installation. Speakers/decks are also cool but do not need any more motors or subs.
4hp kits
Three ma motors
3" 4layer 3hp coils svc 4ohm
2. Specs:
D 3.5 dcr ohms
ID 3.890
OD 4.150
WH 2.470
-----------------
two hk15x2 motors
one hk12x2 motor
3. Description/Condition:
Kits are new set up for ti baskets. To be used on a tc 4hp motor.
One ma motor(15x2) is shifted and needs to be sent to David.
Other two are just fine. All three are the same exact motors besides the engraving on the bottom of the 12x2 and 15x2. One says 3000 watts other says 4000watts but are identical motors.
I can build all three ma motors to any size driver you would want besides a 10" as the motor is too wide unless you would want it like that. Obviously value of them will go up depending on size and what you want.
4. What you are looking for: :
1/0 wire, speaker wire and basically anything to do with installation. Speakers/decks are also cool but do not need any more motors or subs.
