Would I Get Better SQ......?

[Arawak420 10+ year member]

im running 4x 6.5" infinity reference 6012i's and a fosgate punch p4004 to push them. so i geuss 2z 12" in a sealed box w/ an orion 1200d amp to push them. is this an okay set up or do i need to change something. looking for all around sq sound. i would like some low-end if i decide to play something from the Midnite band, which has really deep low bass..

 

[Arawak420 10+ year member]

should i get 4ohm or 2ohm. whats the difference?

 

[fuzzai 10+ year member]

If you want Tight bass, go with 10"s...

 

[DiamondFanatic 10+ year member]

should i get 4ohm or 2ohm. whats the difference?

If you are doing an Orion 1200D you should get the Dual 4's, because then you will end up with a final impedance of 1 ohm. That way you will get the most power out of your amp

I think that you should do two 12's sealed based on your music preference.

 

[UndercoverPunk 5,000+ posts]

If you want Tight bass, go with 10"s...

Once again...

DRIVER DIAMETER DOES NOT DICTATE TRANSIENT RESPONSE!

It should never be assumed that a 10 will be punchier than a 15, driver design is advanced enough now that that rule doesn't apply on alot of speakers.

 

[Arawak420 10+ year member]

i scored a fosgate t1000.1bd for $270 shipped. well i' geuss i'll have to make a descision here real soon.

now i need to trade theis brand new knukonceptz 3 gauge kit for a 1/0 power wire.

 

[tRiGgEr 5,000+ posts]

If you want Tight bass, go with 10"s...

To sum my whole argument against this up,

You are an Idiot.

 

[swaptrex 10+ year member]

port those mofo's!! //content.invisioncic.com/y282845/emoticons/eek.gif.771b7a90cf45cabdc554ff1121c21c4a.gif